[FS] Parting out black 94' GS in Edmonton Alberta
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
[FS] Parting out black 94' GS in Edmonton Alberta
I have decided to let my project car go and concentrate on bringing the SE to as near perfect condition as possible. This means that I have a 94' GS complete for sale in whole or in part. It is missing the alternator and I never had the rear privacy cover.
It is a power car, with sunroof and cruise, no A/C. Manual Tranny is gone. Wraparound spoiler is sold, front lip is pending sale. Interior is solid but the front seats are mismatched. Body panels are not very good. Hood is straight but needs paint. Fenders are poor and doors are bad. I would have had to replace them.
You pay the shipping. I'm shipping a bunch of parts this week. I'm taking orders for a few more weeks and then she'll be crushed. I don't have a lot of spare time, so this is going to be a pretty abbreviated process.
Here are some pics and a few things I hadn't mentioned yet. Driver's side window switch has been sold.
A really nice set of front muds...$35 +ship (PENDING SALE)
Set of Ractive spiral core spark plug wires with about 100km on em...$30 +ship
The headlights are in nice shape (right is really clear, left is pretty clear)...$30 pr +ship
Tails are in great shape...$whatever +ship
The rear bumper cover appears to be new and shot with a satin black...make me an offer cuz shipping is gonna kill it.
The front rotors are aftermarket cross-drilled and slotted. They're rusty from lack of use, but close to new...$20 for the pair+ ship
JVC head unit...$whatever + ship
Here's the interior. Stuff is in decent shape.
I spent a bit of money and time scrounging to get the interior back to stock. The shifter boot is a bit worn through at the top and the trim that surrounds the stereo is cracked. The cupholder works and everything is complete except for the left rear most panel in the hatch area...the hinged one that flips up. I stole it to replace the one in my other car.
The seats are mismatched but in good condition...though I doubt anyone will want to buy a seat off me unless they could pick it up. The door panels are pretty threadbare and the passenger side is slightly ripped at the top by the mirror...you know where they all rip when some meathead yanks on it to remove it.
If you need something specific let me know. $10 +shipping for any panel.
Seriously just make me an offer on this stuff. If I don't sell it to you guys it's going to get crushed.
Driver's side electric window switch is sold.
Injectors are sold.
O2 sensors are sold.
Lip is pending.
Hatch is pending.
Wraparound spoiler is sold.
Front Muds and Rotors are pending.
It is a power car, with sunroof and cruise, no A/C. Manual Tranny is gone. Wraparound spoiler is sold, front lip is pending sale. Interior is solid but the front seats are mismatched. Body panels are not very good. Hood is straight but needs paint. Fenders are poor and doors are bad. I would have had to replace them.
You pay the shipping. I'm shipping a bunch of parts this week. I'm taking orders for a few more weeks and then she'll be crushed. I don't have a lot of spare time, so this is going to be a pretty abbreviated process.
Here are some pics and a few things I hadn't mentioned yet. Driver's side window switch has been sold.
A really nice set of front muds...$35 +ship (PENDING SALE)
Set of Ractive spiral core spark plug wires with about 100km on em...$30 +ship
The headlights are in nice shape (right is really clear, left is pretty clear)...$30 pr +ship
Tails are in great shape...$whatever +ship
The rear bumper cover appears to be new and shot with a satin black...make me an offer cuz shipping is gonna kill it.
The front rotors are aftermarket cross-drilled and slotted. They're rusty from lack of use, but close to new...$20 for the pair+ ship
JVC head unit...$whatever + ship
Here's the interior. Stuff is in decent shape.
I spent a bit of money and time scrounging to get the interior back to stock. The shifter boot is a bit worn through at the top and the trim that surrounds the stereo is cracked. The cupholder works and everything is complete except for the left rear most panel in the hatch area...the hinged one that flips up. I stole it to replace the one in my other car.
The seats are mismatched but in good condition...though I doubt anyone will want to buy a seat off me unless they could pick it up. The door panels are pretty threadbare and the passenger side is slightly ripped at the top by the mirror...you know where they all rip when some meathead yanks on it to remove it.
If you need something specific let me know. $10 +shipping for any panel.
Seriously just make me an offer on this stuff. If I don't sell it to you guys it's going to get crushed.
Driver's side electric window switch is sold.
Injectors are sold.
O2 sensors are sold.
Lip is pending.
Hatch is pending.
Wraparound spoiler is sold.
Front Muds and Rotors are pending.
Last edited by wytbishop on July 31st, 2008, 11:33 pm, edited 2 times in total.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: [FS] Parting out black 94' GS in Edmonton Alberta
Is it auto or manual?
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
Pardon me...it is 5speed, but the tranny is already taken. All the 5speed ancillary parts are in good condition though.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: [FS] Parting out black 94' GS in Edmonton Alberta
Do you have the integra cold air intake on your car?? or just stock stuff?
thank you
thank you
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: [FS] Parting out black 94' GS in Edmonton Alberta
I need the o2 sensors bad please BAD well I just need one.. the rear one.. let me know if u got it please? It doesnt make a diff if its rear or front tho.. i guess
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- Jovian2k
- Supporting Member
- Posts: 851
- Joined: June 3rd, 2004, 2:01 am
- Location: La Prairie, QC + Stratford, CT
Re: [FS] Parting out black 94' GS in Edmonton Alberta
PM sent about wrap around spoiler!
Re: [FS] Parting out black 94' GS in Edmonton Alberta
What needs repaired on the front lip, if it's nothing major I want it.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
chertel- The intake is bone stock
hgallegos915 - I should be able to sell you an o2 sensor
Mikal - I have already given a quote for shipping for the front bumper cover and lip. If that falls through you're next in line.
Everyone...I'm away from home at the moment and this is the last time I'll ba able to check in until the 21st. At that time I will make sure I am current with all of your requests.
hgallegos915 - I should be able to sell you an o2 sensor
Mikal - I have already given a quote for shipping for the front bumper cover and lip. If that falls through you're next in line.
Everyone...I'm away from home at the moment and this is the last time I'll ba able to check in until the 21st. At that time I will make sure I am current with all of your requests.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: [FS] Parting out black 94' GS in Edmonton Alberta
How are both doors and the hatch? If they are in good condition id consider
driving up to Edmonton from Calgary to pick them up pending what you
want for them.
driving up to Edmonton from Calgary to pick them up pending what you
want for them.
1994 MX-3 RS
Worklog: viewtopic.php?f=46&t=62251
B6 goodies for sale:
viewtopic.php?f=2&t=66333
2nd BP engine: http://www.clubprotege.com/forum/showthread.php?t=46695
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
Bumpity bump...
I'm going to take some pictures of the car today. I will take specific pics of parts which have been requested and some other shots to show the general condition of everything else. If you're still interested once you've seen the pictures, let me know and tell me what they're worth to you.
I will be spending next weekend dismantling the car. Once I have everything off the car I will confirm the cost of shipping.
Things like power window switches and interior panels are still available. The car has a fairly nice Alpine head unit. There's a bra on it in good condition...although the dumba** that put it on there cut a hole in it to show the emblem.
Once the spoken for parts are off, the car will be disposed of immediately.
I'm going to take some pictures of the car today. I will take specific pics of parts which have been requested and some other shots to show the general condition of everything else. If you're still interested once you've seen the pictures, let me know and tell me what they're worth to you.
I will be spending next weekend dismantling the car. Once I have everything off the car I will confirm the cost of shipping.
Things like power window switches and interior panels are still available. The car has a fairly nice Alpine head unit. There's a bra on it in good condition...although the dumba** that put it on there cut a hole in it to show the emblem.
Once the spoken for parts are off, the car will be disposed of immediately.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
-
- Supporting Member
- Posts: 281
- Joined: April 15th, 2008, 10:04 pm
- Location: Western NY
Re: [FS] Parting out black 94' GS in Edmonton Alberta
Driver's power window switch shipped to 14719 (USA), and I'd like to get in line for the lip too if both fall out.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
Here are some pics and a few other things I hadn't mentioned yet. Driver's side window switch has been sold.
A really nice set of front muds...$35 +ship
Set of Ractive spiral core spark plug wires with about 100km on em...$30 +ship
The headlights are in nice shape (right is really clear, left is pretty clear)...$30 ea +ship
Tails are in great shape...$whatever +ship
The rear bumper cover appears to be new and shot with a satin black...make me an offer cuz shipping is gonna kill it.
The front rotors are aftermarket cross-drilled and slotted. They're rusty from lack of use, but close to new...$20 for the pair+ ship
JVC head unit...$whatever + ship
Seriously just make me an offer on this stuff. If I don't sell it to you guys it's going to get crushed.
A really nice set of front muds...$35 +ship
Set of Ractive spiral core spark plug wires with about 100km on em...$30 +ship
The headlights are in nice shape (right is really clear, left is pretty clear)...$30 ea +ship
Tails are in great shape...$whatever +ship
The rear bumper cover appears to be new and shot with a satin black...make me an offer cuz shipping is gonna kill it.
The front rotors are aftermarket cross-drilled and slotted. They're rusty from lack of use, but close to new...$20 for the pair+ ship
JVC head unit...$whatever + ship
Seriously just make me an offer on this stuff. If I don't sell it to you guys it's going to get crushed.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- Dragyn Vyrus
- Regular Member
- Posts: 228
- Joined: May 12th, 2008, 9:36 pm
- Location: Sherwood Park, Alberta
Re: [FS] Parting out black 94' GS in Edmonton Alberta
how much for the Rear bumper?
And if you still have the front how much for that too
i live in Sherwood Park so no worries for shipping i'll just come grab it
And if you still have the front how much for that too
i live in Sherwood Park so no worries for shipping i'll just come grab it
93 MX-3 ZE-GS - Sold
95 MX-3 RS - Bone stock winter car.
92 JDM turbo MR2 - SSQV, Cusco strut tower bar, ATS intercooler kit, Berk Exhuast, HKS EVC-S
95 MX-3 RS - Bone stock winter car.
92 JDM turbo MR2 - SSQV, Cusco strut tower bar, ATS intercooler kit, Berk Exhuast, HKS EVC-S
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
Another member is already in line for the front bumper and there are a couple of takers for the lip. The front has a crack on the passenger side that would need repair.
If the front bumper doesn't go you can have them both. You can definitely have the rear. $100. If the front doesn't go I'll make you a nice deal.
If the front bumper doesn't go you can have them both. You can definitely have the rear. $100. If the front doesn't go I'll make you a nice deal.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: [FS] Parting out black 94' GS in Edmonton Alberta
how aboot the interior, eh?
Have any pictures of it's condition inside?
Have any pictures of it's condition inside?