[WTB] Cold Air intake
-
- Junior Member
- Posts: 8
- Joined: April 23rd, 2008, 8:19 pm
[WTB] Cold Air intake
WTB Cold air intake not one of the cheap extenable ones. I need one that will fit a 95 DOHC 4 cylinder mx-3. if willing to sell name a reasonable price. and i will respond thanks!
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: [WTB] Cold Air intake
Many people have used this one on the B6 DOHC
Click Here
That price is WAY too high though. You can modify an Integra intake to fit. Pretty much anyone will fit with a bit of cutting and couplers.
It used to be available on ebay for about $40, but was removed recently. I don't know if it will be added again. Here's a thread regarding it's installation on a '94+ mx-3.
Click Here
Click Here
That price is WAY too high though. You can modify an Integra intake to fit. Pretty much anyone will fit with a bit of cutting and couplers.
It used to be available on ebay for about $40, but was removed recently. I don't know if it will be added again. Here's a thread regarding it's installation on a '94+ mx-3.
Click Here
-
- Junior Member
- Posts: 8
- Joined: April 23rd, 2008, 8:19 pm
Re: [WTB] Cold Air intake
Thank you!
Re: [WTB] Cold Air intake
Think the one on the above site for the mx6 v6 would work on a v6 klze in a mx-3. It is only $125
thanx.
thanx.
- eyezpinned
- Regular Member
- Posts: 208
- Joined: March 9th, 2006, 2:29 pm
- Location: Philadelphia
- Contact:
Re: [WTB] Cold Air intake
here's that aspec one for $89:
http://www.eautoworks.com/product-Aspec-19722.htm" onclick="window.open(this.href);return false;
http://www.eautoworks.com/product-Aspec-19722.htm" onclick="window.open(this.href);return false;
93 rs: tokico struts & eibach springs, 15' rota gt3s, cf hood & gas lid, 2.5' exhaust w high-flow cat, tranny cooler, reupholstered seats, custom black interior, chrome miata handles, momo wheel & ebrake, spyder black projector lights w hid, altezzas, clear corners/sides, eclipse 8454 hu, diamond hex components w/ 3-way add-on & an re se 15' powered by 300/2v2 & 500/1 jl slash amps, corksport mazdaspeed bumper, euro mini sideskirts, fresh paint
Re: [WTB] Cold Air intake
http://www.eautoworks.com/product-Aspec-19723.htm" onclick="window.open(this.href);return false; I was looking at that one for the mx-6 that looks like it will work?
thanx.
thanx.