I will finally have my ducks in a row in about a month, and am looking forward to completing (for a while, at least) my car. These are the final (for now) touches I "need";
A welded LSD, and whatever gears are different on the 626, or complete tranny done this way
A 22mm or thicker rear sway bar (whiteline, OEM Euro, or any '96, or newer).
Bored TB for a 626 Mani.
SRD crossmember, and lower tie bar.
*EDIT: I got Sideskirts.*
Lightweight hood (CF, FG)
MSD 6A, or 6AL
That's all I can think of, but will probably add more..
I can't afford to get it all new so I thought I'd take a chance..
It doesn't hurt to try, I always say. Well except when I fought MMA. That hurt. And getting branded. That hurt alot. Uh, I think I'll stop saying that.
Last edited by fowljesse on September 28th, 2008, 11:51 pm, edited 9 times in total.
Thanks, superK. Mooneggs is going to hopefully get me the panel, but the back seat would be great, if shipping isn't too much. I have leather front, and lower rear, in the fast one, and prefect seats in my stock one.
Garage (sort of)
99 Acura Integra GSR-T (totaled)
03 Mercedes Benz C230K (rear upgrade from 3.27 to 3.67 ratio) running strong at 108K miles
92 MX-3 v6 (that i wanted to twin turbo w/ an ht12 and ht15) - Parting out now!!!
90 MX-5 getting the rotary treatment bdavis2005 @ gmail . com feedback link -> http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=62911" onclick="window.open(this.href);return false;
Thanks, matt. I'm going to get the mirror from FIaddict, if it doesn't have the junk in the edges, but Interested in the seat, if shipping isn't too much. I'm at 98671.