[WTB] Alot ' stuff, 22mm swaybar, light hood, MSD 6A...
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
[WTB] Alot ' stuff, 22mm swaybar, light hood, MSD 6A...
I will finally have my ducks in a row in about a month, and am looking forward to completing (for a while, at least) my car. These are the final (for now) touches I "need";
A welded LSD, and whatever gears are different on the 626, or complete tranny done this way
A 22mm or thicker rear sway bar (whiteline, OEM Euro, or any '96, or newer).
Bored TB for a 626 Mani.
SRD crossmember, and lower tie bar.
*EDIT: I got Sideskirts.*
Lightweight hood (CF, FG)
MSD 6A, or 6AL
That's all I can think of, but will probably add more..
I can't afford to get it all new so I thought I'd take a chance..
It doesn't hurt to try, I always say. Well except when I fought MMA. That hurt. And getting branded. That hurt alot. Uh, I think I'll stop saying that.
A welded LSD, and whatever gears are different on the 626, or complete tranny done this way
A 22mm or thicker rear sway bar (whiteline, OEM Euro, or any '96, or newer).
Bored TB for a 626 Mani.
SRD crossmember, and lower tie bar.
*EDIT: I got Sideskirts.*
Lightweight hood (CF, FG)
MSD 6A, or 6AL
That's all I can think of, but will probably add more..
I can't afford to get it all new so I thought I'd take a chance..
It doesn't hurt to try, I always say. Well except when I fought MMA. That hurt. And getting branded. That hurt alot. Uh, I think I'll stop saying that.
Last edited by fowljesse on September 28th, 2008, 11:51 pm, edited 9 times in total.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] LSD, tall gear, 22mm sway bar..
EDIT: I got a rear interior panel..
Last edited by fowljesse on June 29th, 2008, 7:59 pm, edited 1 time in total.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] LSD, tall gear, 22mm sway bar, sideskirts, hood
I also need a nice '93 style rear upper seat.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] SIDESKIRTS, LSD, tall gear, 22mm sway bar, hood
I really want sideskirts EDIT: got 'em.
Last edited by fowljesse on June 29th, 2008, 9:33 pm, edited 1 time in total.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: [WTB] SIDESKIRTS, LSD, tall gear, 22mm sway bar, hood
stock or aftermarket?
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] SIDESKIRTS, LSD, tall gear, 22mm sway bar, hood
Either ones. I prefer the MazdaSpeed ones, though.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] SIDESKIRTS, LSD, tall gear, 22mm sway bar, hood
Added: MSD 6A, or 6AL
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: [WTB] Lotsa Stuff! SIDESKIRTS, tall gear, 22mm swaybar, hood
I can get the panels, they're in good shape. There's a junked GS down here
the back seat i do believe is in great condition... I know the lower back seat is perfect, but the upper back seat I'll have to double check...
you have the leather seats, right? I know there's some perfect condition front blue seats here, but I don't know if you need those or not.
the back seat i do believe is in great condition... I know the lower back seat is perfect, but the upper back seat I'll have to double check...
you have the leather seats, right? I know there's some perfect condition front blue seats here, but I don't know if you need those or not.
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] Lotsa Stuff! SIDESKIRTS, tall gear, 22mm swaybar, hood
Thanks, superK. Mooneggs is going to hopefully get me the panel, but the back seat would be great, if shipping isn't too much. I have leather front, and lower rear, in the fast one, and prefect seats in my stock one.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] Lotsa Stuff! projectors, 22mm swaybar, light hood
I need a good rearview mirror, hopefully from somewhere near Portland, OR, so shipping is cheap.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: [WTB] Rview mirror, 22mm swaybar, light hood, MSD 6A
still need the mirror?
email me, kind sir.
email me, kind sir.
Garage (sort of)
99 Acura Integra GSR-T (totaled)
03 Mercedes Benz C230K (rear upgrade from 3.27 to 3.67 ratio) running strong at 108K miles
92 MX-3 v6 (that i wanted to twin turbo w/ an ht12 and ht15) - Parting out now!!!
90 MX-5 getting the rotary treatment
bdavis2005 @ gmail . com
feedback link -> http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=62911" onclick="window.open(this.href);return false;
99 Acura Integra GSR-T (totaled)
03 Mercedes Benz C230K (rear upgrade from 3.27 to 3.67 ratio) running strong at 108K miles
92 MX-3 v6 (that i wanted to twin turbo w/ an ht12 and ht15) - Parting out now!!!
90 MX-5 getting the rotary treatment
bdavis2005 @ gmail . com
feedback link -> http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=62911" onclick="window.open(this.href);return false;
Re: [WTB] Rview mirror, 22mm swaybar, light hood, MSD 6A
Mirror and upper back seat here. LMK
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] Rview mirror, 22mm swaybar, light hood, MSD 6A
Thanks, matt. I'm going to get the mirror from FIaddict, if it doesn't have the junk in the edges, but Interested in the seat, if shipping isn't too much. I'm at 98671.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] Alot ' stuff, 22mm swaybar, light hood, MSD 6A...
Still want this stuff! I also would like Altezzas.
AND I'm looking for any performance upgrade made by MX-3.com members.
AND I'm looking for any performance upgrade made by MX-3.com members.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: [WTB] Alot ' stuff, 22mm swaybar, light hood, MSD 6A...
I can make you a chip and an electric supercharger. +101.223Hp