just about finished boosting a de/ze hybrid *pics*
just about finished boosting a de/ze hybrid *pics*
k im just about done...i got the motor to start and found my cheapo turbo xs ov was leaking so ordered a hks SSQV...and ordered some ngk wires and plugs...well here are some pics
before (ze bottom end de heads turbo)notice bov after the vaf? i didn't put it there pretty sure half the reason it was leaking
<a
now rebuilt de bottom p&p ze heads lowered CR to 9.2:1 57trim turbo
de/ze motor
combustion chamber on ze heads
de rebuilt had 170k and tons of carbon
this car is gonna be quick..im saving for mil S's MSnS electronic boost controller and slicks
before (ze bottom end de heads turbo)notice bov after the vaf? i didn't put it there pretty sure half the reason it was leaking
<a
now rebuilt de bottom p&p ze heads lowered CR to 9.2:1 57trim turbo
de/ze motor
combustion chamber on ze heads
de rebuilt had 170k and tons of carbon
this car is gonna be quick..im saving for mil S's MSnS electronic boost controller and slicks
93 mx-3, hybrid de/ze-turbo P&P'd ZE heads,9.2:1 CR,garrett t3 57trim .60/.63,HKS SSQV bov, turbo xs 38mmW/G,24in downpipe,sts,13lbfw,sleeper FMIC,65mm TB,Walbro 255lph FP,F&R strut bars, ngk plugs/wires
p/s,a/c,cruise,vris delete..all go from here
p/s,a/c,cruise,vris delete..all go from here
Re: just about finished boosting a de/ze hybrid *pics*
i like the painted block that looks really clean. Nice build!!
92 Blaze Red MAZDA Mx3 <GS> ZE, millenia manifold. gutted interior, filled mounts, fidanza fw, act 6puck.
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: just about finished boosting a de/ze hybrid *pics*
That brings me joy, just looking at it, and imagining mine going that way.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: just about finished boosting a de/ze hybrid *pics*
damn you could eat off that thing...just wondering what makes it a hybrid...
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: just about finished boosting a de/ze hybrid *pics*
If you use a de head on a ze or a ze head on a de motor it becomes a hybrid or Frankenstein motor because you are using parts from two slightly different motors
Re: just about finished boosting a de/ze hybrid *pics*
gotcha!!solo_ryder wrote:If you use a de head on a ze or a ze head on a de motor it becomes a hybrid or Frankenstein motor because you are using parts from two slightly different motors
think i seen this car in youtube
Re: just about finished boosting a de/ze hybrid *pics*
hey slinky hows the build coming together?
92 Blaze Red MAZDA Mx3 <GS> ZE, millenia manifold. gutted interior, filled mounts, fidanza fw, act 6puck.
- Flinch
- Regular Member
- Posts: 143
- Joined: April 25th, 2006, 10:49 pm
- Location: Calgary, Alberta, Canada
Re: just about finished boosting a de/ze hybrid *pics*
hey my build is at the step where yours is in pic 2 when i ive it from the front o th shop its fine unless i gun it and than after like 3500 it bucks and almost stalls sometimes it does stall it that because i dont have intercooler piping rigged u yet? should it not just run like its NA?
-KL31 stock internals with curved neck intake manifold and KL36 ecu
-Turbo running 7.5psi
-FMI 3"x12"x32" all alluminum and welded, have a 7.5 PSI spring she just creeps on cold nights
-ACT 6puck sprung/96 probe tranny
-Short shifter
-HEI and MSD 6al (makes a big difference when you spend the 65$ ont he right spark plugs)
-KYB GR-2 struts with H & R springs
-Megan racing seats
-Personal 280mm stearing wheel
-Familia rear strut tower bar
-Turbo running 7.5psi
-FMI 3"x12"x32" all alluminum and welded, have a 7.5 PSI spring she just creeps on cold nights
-ACT 6puck sprung/96 probe tranny
-Short shifter
-HEI and MSD 6al (makes a big difference when you spend the 65$ ont he right spark plugs)
-KYB GR-2 struts with H & R springs
-Megan racing seats
-Personal 280mm stearing wheel
-Familia rear strut tower bar
Re: just about finished boosting a de/ze hybrid *pics*
mgxs3...not so good..i got my new ngk plugs and wires,cap,rotor, put my hks ssqvbov on and still the same s---...seems like a timing thing..i checked it and it's perfect..so i think a intake mani leak...and im picking up a kl31 ecu and vaf so im ditching the ze ecu and je-50 vaf..hope those 2 things fix it
tmac414..yes was on you tube..13.4 at 108mph
flinch...i got a fmic setup...is ur bov before or after vaf? and is it leaking??
tmac414..yes was on you tube..13.4 at 108mph
flinch...i got a fmic setup...is ur bov before or after vaf? and is it leaking??
93 mx-3, hybrid de/ze-turbo P&P'd ZE heads,9.2:1 CR,garrett t3 57trim .60/.63,HKS SSQV bov, turbo xs 38mmW/G,24in downpipe,sts,13lbfw,sleeper FMIC,65mm TB,Walbro 255lph FP,F&R strut bars, ngk plugs/wires
p/s,a/c,cruise,vris delete..all go from here
p/s,a/c,cruise,vris delete..all go from here
Re: just about finished boosting a de/ze hybrid *pics*
slinkymx3 wrote:..13.4 at 108mph
Re: just about finished boosting a de/ze hybrid *pics*
well i found another vac leak...fixed swapped out the ze ecu and vaf for a kl07 ecu and a kl01 vaf...runs great..breakin in motor as we speak...pics and vids soon to come....
93 mx-3, hybrid de/ze-turbo P&P'd ZE heads,9.2:1 CR,garrett t3 57trim .60/.63,HKS SSQV bov, turbo xs 38mmW/G,24in downpipe,sts,13lbfw,sleeper FMIC,65mm TB,Walbro 255lph FP,F&R strut bars, ngk plugs/wires
p/s,a/c,cruise,vris delete..all go from here
p/s,a/c,cruise,vris delete..all go from here
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: just about finished boosting a de/ze hybrid *pics*
hmmnice! but why didnt u do DE bottom ed and ZE heads?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: just about finished boosting a de/ze hybrid *pics*
He did, read the first post
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: just about finished boosting a de/ze hybrid *pics*
it sais ZE bottom end and DE heads lol thats why i asked.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Re: just about finished boosting a de/ze hybrid *pics*
he then goes on to say "now rebuilt de bottom p&p ze heads lowered CR to 9.2:1 57trim turbo"
its right between 2 of the pics
its right between 2 of the pics