just about finished boosting a de/ze hybrid *pics*

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
Post Reply
slinkymx3
Regular Member
Posts: 60
Joined: March 26th, 2008, 10:31 pm

just about finished boosting a de/ze hybrid *pics*

Post by slinkymx3 »

k im just about done...i got the motor to start and found my cheapo turbo xs ov was leaking so ordered a hks SSQV...and ordered some ngk wires and plugs...well here are some pics
before (ze bottom end de heads turbo)notice bov after the vaf? i didn't put it there pretty sure half the reason it was leaking
<a Image
now rebuilt de bottom p&p ze heads lowered CR to 9.2:1 57trim turbo
Image
de/ze motor
Image
combustion chamber on ze heads
Image
Image
de rebuilt had 170k and tons of carbon
Image

this car is gonna be quick..im saving for mil S's MSnS electronic boost controller and slicks
93 mx-3, hybrid de/ze-turbo P&P'd ZE heads,9.2:1 CR,garrett t3 57trim .60/.63,HKS SSQV bov, turbo xs 38mmW/G,24in downpipe,sts,13lbfw,sleeper FMIC,65mm TB,Walbro 255lph FP,F&R strut bars, ngk plugs/wires
p/s,a/c,cruise,vris delete..all go from here
Top
User avatar
MgXs3
Regular Member
Posts: 148
Joined: December 3rd, 2007, 3:09 pm

Re: just about finished boosting a de/ze hybrid *pics*

Post by MgXs3 »

i like the painted block that looks really clean. Nice build!! :love:
92 Blaze Red MAZDA Mx3 <GS> ZE, millenia manifold. gutted interior, filled mounts, fidanza fw, act 6puck.
Image
Top
User avatar
fowljesse
Supporting Member
Posts: 5676
Joined: March 17th, 2006, 2:59 pm
Location: portland, OR
Contact:
Contact fowljesse

Re: just about finished boosting a de/ze hybrid *pics*

Post by fowljesse »

That brings me joy, just looking at it, and imagining mine going that way.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Top
User avatar
tmac4t4
Regular Member
Posts: 686
Joined: May 31st, 2008, 6:06 pm
Location: Guelph, ON

Re: just about finished boosting a de/ze hybrid *pics*

Post by tmac4t4 »

damn you could eat off that thing...just wondering what makes it a hybrid... :?:
ImageImageImageImage
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: just about finished boosting a de/ze hybrid *pics*

Post by solo_ryder »

If you use a de head on a ze or a ze head on a de motor it becomes a hybrid or Frankenstein motor because you are using parts from two slightly different motors
Top
User avatar
tmac4t4
Regular Member
Posts: 686
Joined: May 31st, 2008, 6:06 pm
Location: Guelph, ON

Re: just about finished boosting a de/ze hybrid *pics*

Post by tmac4t4 »

solo_ryder wrote:If you use a de head on a ze or a ze head on a de motor it becomes a hybrid or Frankenstein motor because you are using parts from two slightly different motors
gotcha!!
think i seen this car in youtube :?:
ImageImageImageImage
Top
User avatar
MgXs3
Regular Member
Posts: 148
Joined: December 3rd, 2007, 3:09 pm

Re: just about finished boosting a de/ze hybrid *pics*

Post by MgXs3 »

hey slinky hows the build coming together?
92 Blaze Red MAZDA Mx3 <GS> ZE, millenia manifold. gutted interior, filled mounts, fidanza fw, act 6puck.
Image
Top
User avatar
Flinch
Regular Member
Posts: 143
Joined: April 25th, 2006, 10:49 pm
Location: Calgary, Alberta, Canada

Re: just about finished boosting a de/ze hybrid *pics*

Post by Flinch »

hey my build is at the step where yours is in pic 2 when i ive it from the front o th shop its fine unless i gun it and than after like 3500 it bucks and almost stalls sometimes it does stall it that because i dont have intercooler piping rigged u yet? should it not just run like its NA?
-KL31 stock internals with curved neck intake manifold and KL36 ecu
-Turbo running 7.5psi
-FMI 3"x12"x32" all alluminum and welded, have a 7.5 PSI spring she just creeps on cold nights
-ACT 6puck sprung/96 probe tranny
-Short shifter
-HEI and MSD 6al (makes a big difference when you spend the 65$ ont he right spark plugs)
-KYB GR-2 struts with H & R springs
-Megan racing seats
-Personal 280mm stearing wheel
-Familia rear strut tower bar
Top
slinkymx3
Regular Member
Posts: 60
Joined: March 26th, 2008, 10:31 pm

Re: just about finished boosting a de/ze hybrid *pics*

Post by slinkymx3 »

mgxs3...not so good..i got my new ngk plugs and wires,cap,rotor, put my hks ssqvbov on and still the same s---...seems like a timing thing..i checked it and it's perfect..so i think a intake mani leak...and im picking up a kl31 ecu and vaf so im ditching the ze ecu and je-50 vaf..hope those 2 things fix it

tmac414..yes was on you tube..13.4 at 108mph

flinch...i got a fmic setup...is ur bov before or after vaf? and is it leaking??
93 mx-3, hybrid de/ze-turbo P&P'd ZE heads,9.2:1 CR,garrett t3 57trim .60/.63,HKS SSQV bov, turbo xs 38mmW/G,24in downpipe,sts,13lbfw,sleeper FMIC,65mm TB,Walbro 255lph FP,F&R strut bars, ngk plugs/wires
p/s,a/c,cruise,vris delete..all go from here
Top
User avatar
tmac4t4
Regular Member
Posts: 686
Joined: May 31st, 2008, 6:06 pm
Location: Guelph, ON

Re: just about finished boosting a de/ze hybrid *pics*

Post by tmac4t4 »

slinkymx3 wrote:..13.4 at 108mph
:bowdown: :bowdown:
ImageImageImageImage
Top
slinkymx3
Regular Member
Posts: 60
Joined: March 26th, 2008, 10:31 pm

Re: just about finished boosting a de/ze hybrid *pics*

Post by slinkymx3 »

well i found another vac leak...fixed swapped out the ze ecu and vaf for a kl07 ecu and a kl01 vaf...runs great..breakin in motor as we speak...pics and vids soon to come....
93 mx-3, hybrid de/ze-turbo P&P'd ZE heads,9.2:1 CR,garrett t3 57trim .60/.63,HKS SSQV bov, turbo xs 38mmW/G,24in downpipe,sts,13lbfw,sleeper FMIC,65mm TB,Walbro 255lph FP,F&R strut bars, ngk plugs/wires
p/s,a/c,cruise,vris delete..all go from here
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Re: just about finished boosting a de/ze hybrid *pics*

Post by hgallegos915 »

hmmnice! but why didnt u do DE bottom ed and ZE heads?
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: just about finished boosting a de/ze hybrid *pics*

Post by solo_ryder »

He did, read the first post :P
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Re: just about finished boosting a de/ze hybrid *pics*

Post by hgallegos915 »

it sais ZE bottom end and DE heads lol thats why i asked.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
User avatar
tmac4t4
Regular Member
Posts: 686
Joined: May 31st, 2008, 6:06 pm
Location: Guelph, ON

Re: just about finished boosting a de/ze hybrid *pics*

Post by tmac4t4 »

he then goes on to say "now rebuilt de bottom p&p ze heads lowered CR to 9.2:1 57trim turbo"
its right between 2 of the pics
ImageImageImageImage
Top
Post Reply

Return to “Forced Induction”