Need help with my TPS.
Need help with my TPS.
Hello,
i'm from the dutch mx-3 community and i have a problem that i dont get fixed.
everytime when i hit the trohtle my idle speed hangs a few seconds on 1500 rpm.
also when ten en grnd where connected. here you see it yourself:http://www.youtube.com/watch?v=cGKyWYLXoMk
now i've adjusted my tps and set him to recommend settings, just like the FAQ @ this forum.
Now when i connect ten en grnd my idle speed goes to normal value.
but when they are not connected the problems is still there.
i hope you can help me.
greets M3nace
i'm from the dutch mx-3 community and i have a problem that i dont get fixed.
everytime when i hit the trohtle my idle speed hangs a few seconds on 1500 rpm.
also when ten en grnd where connected. here you see it yourself:http://www.youtube.com/watch?v=cGKyWYLXoMk
now i've adjusted my tps and set him to recommend settings, just like the FAQ @ this forum.
Now when i connect ten en grnd my idle speed goes to normal value.
but when they are not connected the problems is still there.
i hope you can help me.
greets M3nace
Re: Need help with my TPS.
kick...
Re: Need help with my TPS.
sorry dude, don't know how to help, but I have to say, I like your gauges. Where did you get them? Back to the problem? could the sensor be bad? but I really don't know
Re: Need help with my TPS.
man those are some amazing gauges haha. hmm have you checked the car for codes? hmm maybe a IAC vale sticking and then closing not too sure. what engine are you running? dual overhead cam or single?
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: Need help with my TPS.
I would suggest cleaning the idle air control valve where the coolant passes through. It gets very dirty in there and could be causing the valve to stick open for a second.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Need help with my TPS.
does v6 have same valve? I have same problem with idle sticking at 1200-1500rpm. Ive noticed though when car is stopped on a hill it will idle normally at ~600rpmwytbishop wrote:I would suggest cleaning the idle air control valve where the coolant passes through. It gets very dirty in there and could be causing the valve to stick open for a second.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
Re: Need help with my TPS.
hey,
the gauges are from poland. We had a groupbuy with the dutch community.
I run a 1.6 dohc. I have cleaned the IAC. But the funny thing is.. when ten and ground are connected he runs normally.
and when is @ 1500 rpm and i set the airco in, he falls back to 750 rpm.
greets m3nace
the gauges are from poland. We had a groupbuy with the dutch community.
I run a 1.6 dohc. I have cleaned the IAC. But the funny thing is.. when ten and ground are connected he runs normally.
and when is @ 1500 rpm and i set the airco in, he falls back to 750 rpm.
greets m3nace
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: Need help with my TPS.
Replace the TB with a known good unit from one of your friend's cars if you have one and see if it goes away. If it's not a sensor or a TB issue it could be mechanical like something obstructing the throttle cable.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: Need help with my TPS.
ok i will try...
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Need help with my TPS.
maybe try cleaning out your TB real good.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
Re: Need help with my TPS.
i've done that with no result...
next weak i gonna change my TB with that from a friend.
next weak i gonna change my TB with that from a friend.
Re: Need help with my TPS.
my car used to do the same thing, it got so bad that it would no longer idle under 1500. I just replaced the whole tb with the sensors and the idle motor. I had no problems after, good luck.
Btw i too love the gauges
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Btw i too love the gauges
![Very Happy :D](./images/smilies/icon_biggrin.gif)
<a href="http://www.fodey.com/generators/animate ... .asp"><img src="http://r3.fodey.com/117ef9486659942269d ... 7601.1.gif" border=0 width="404" height="110" alt="Ninja!"></a>
- vansolrick
- Regular Member
- Posts: 58
- Joined: December 30th, 2008, 1:46 pm
Re: Need help with my TPS.
I found similar gauges on ebay in MPH
Should be coming in today or tomorrow.
![Very Happy :D](./images/smilies/icon_biggrin.gif)