ok, I think I am right that the fuel pump relay is located in the passenger side kick panel bolted to the same bracket that the ecu is attached to.
is that right?
thanks
7
edit:
does anyone know the wiring layout of that relay? it would save me some time when I am setting up my MSnS towmorrow.
I need to know which wire has voltage when cranking and running.
fuel pump relay.
-
se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
fuel pump relay.
Last edited by se7en on April 18th, 2008, 1:02 am, edited 1 time in total.
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
-
OldMan
- Regular Member
- Posts: 63
- Joined: September 29th, 2007, 1:53 am
- Location: Cohutta, Georgia USA
Re: fuel pump relay.
It is on mine, even though mine is a 4 banger. It's simple to check , just unplug it and turn on the key and see if you can hear your fuel pump kick in or not. Hope this helps. 
OldMan
OldMan
-
umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: fuel pump relay.
Not to be an anus, but the ecu's under the center console, not the kick panel.se7en wrote:ok, I think I am right that the fuel pump relay is located in the passenger side kick panel bolted to the same bracket that the ecu is attached to.
I've always considered the outer panels on the sides with the doors to be the kick panels. 
