DOHC vs. SOHC cold air intake

JimsMX3 · Post by **JimsMX3** » November 20th, 2007, 8:30 am

Trying to find a cold air for my 95 1.6 dohc. I read that the cold airs from ebay are sohc and will not work with dohc. Is this true and can i Mod a sohc intake to fit a dohc?

Josh · Post by **Josh** » November 20th, 2007, 9:47 am

the piping kit for the SOHC will fit the DOHC with some minor modding and fit angling

JimsMX3 · Post by **JimsMX3** » November 20th, 2007, 11:57 am

but all nessisary holes for other tubes are in the pipeing? basically can i buy the kit and have everything i need for it to work??

SuperK · Post by **SuperK** » November 20th, 2007, 12:46 pm

it will fit PERFECTLY and you'll have weird parts left over.

And what I mean by perfectly, I mean that you'll be doing some straining to align some of the screw holes, but with perseverance and some sweating, you might be able to persuade everything to line up right.

But yes, that's the kit you want to purchase.

JimsMX3 · Post by **JimsMX3** » November 20th, 2007, 12:48 pm

awesome thanks.

Savin · Post by **Savin** » November 28th, 2007, 10:05 pm

if someone were to log doin that, it would make a good addition to the FAQ. maybe once my engine gets all situated i'll do it. the kit isnt expensive either which is good. i'll do it if it hasnt been added to the FAQ already that is, haha

import_fan7 · Post by **import_fan7** » November 29th, 2007, 8:47 pm

i have the kit from ebay for my 95 dohc..start to finish took about 40mins to put in ..oh and the little hose that goes into the stock air box..there isnt a place for that little guy so most people ive talked to and including me just lettin it hang!! and it works great

DJGypsy · Post by **DJGypsy** » December 5th, 2007, 11:12 am

http://www.mx-3.com/phpBB2/viewtopic.ph ... t=cai+ebay