[GI] Harness bars and others

[MazdaManiacMx3]

I would prefer the one that colinsmx3 was making - just a b pillar bar!

Why ??
Anyone with a welder and moderate skill can make one of those , it was just a strait bar with a flange welded on , and a couple holes drilled in it .

your key words are "anyone with a welder and moderate skill"...

I do not have those skills, nor do I know anyone who does

Mooneggs you seem like a pretty mechanical guy , get a welder from Harbor freight or even Home Depot--- Lowes And get some scrap metal , it sounds harder than it is , I guarantee you before you go through 1 spool of wire you will have the hang of mig welding. Will it look as perfect as a tig no ... Will it function .... YES . The welds will most likely be hidden as well .

Even if you get a cheap welder and run it with Argon Gas , Maybe $200 total for a cheapie , you can get some nice welds .

Now if you were looking into something like a cage , leave something like that to a professional,

If you decide to buy a welder , look on google for info , read a book , or just watch instructional videos on Youtube.

Kris-

[lowridah313]

Well I may end this offer. It seems there are some ppl out there that have a problem with me offering various products. If you have the skills, tools, and money by all means go make your own. I did this to help those ppl lacking in those departments, and make a little extra money for myself.

[hppwdn]

I'd be interested in a harness bar.

[MazdaManiacMx3]

If you are referring to me , then no I am not trying to take away from your product or slander you in any way , he was referring to a product made by another board member whose quality was far below yours ,
Now Your work looks very professional , and even I may be interested in some of your products depending on cost , design , etc, please keep up the good work and don't give up because of me .

It's nice to see someone making custom work ,
It's just that I was confused to the fact that Mooneggs wanted to downgrade to the other guys design , when yours was obviously much nicer ..

Kris

[mx3autozam]

Hey Tom. by any chance is this place called Full Throtle Welding located on bishop??

well anysays I am interested in a Trunk brace, Harness bar and Floor bar or whatever. Anything that will stiffen up my car. Wanna use my car for the design, feel free too.

[lowridah313]

No its not Full Throttle Welding, and by no means am I going to advertise for the shop on this site. Thanks for the offer John, but I'm sure I have a design car. Since I'm driving an mx, I dont have to worry about someone elses car. I may use your car if we're doing a cage, that way I have your car to put it in.

[mx3autozam]

Tom, whatever parts you design for your car please let me know. I am intrested in some of the parts you have been considering!

[lowridah313]

So far I have 4 ppl intrested. So I may do a small run of parts.
Mooneggs - B-pillar Brace
93_4Banger - Harness Bar
hppwdn - Harness Bar
mx3autozam - Harness Bar, Floor Brace, Trunk Pan Brace

If there is anymore ppl please let me know.
-Tom-

[Mooneggs]

I'm actually interested in all of the above LOL... I might as well just get a full roll cage *sigh*

[RS_OBD'oh_2]

I'd like to get a harness bar as well. btw, great idea.

[MazdaManiacMx3]

Depending on when this goes down , i might be interested in some stuff..
Right now Im tight on cash for the MX , I have other cars that come first in my budget.
Kris-

[mazdax3speed]

very nice work on the mustang, im interested in a harness bar and possibly some other braces depending on price

agreed standard Bpillar bar is fairly easy, i can make one, but i cant make one that looks very nice lol

[lowridah313]

Sorry Guys its been awhile. We are currently moving the shop, and for that reason I haven't had time to really put an effort forth on these products. As soon as we are settled into the new shop, this will be my first priority.
Sorry for the delay.
-Tom-

[Mooneggs]

it's all good thanks for the update

[fowljesse]

I'd be intrested in a harness bar, and maybe strut tower bars, fully welded. I have tower bars, but am sure custom welded ones would be stiffer.