//***v6 turbo kit in production...yes!!! for the mx-3***\\
What I have figured out is that they are more than likely not sending any more parts. The last I recieved were 3 turbos which are going out to offset those involved. Kris, its been in the car for 3 days, but I have not sent it out yet. Today is thanksgiving in Canada, everything is closed.
At this point everyone (but myself) has recieved a majority of their investment. Everyone has taken a hit as well. In my opinion, this should be the end of this thread as its going nowhere anymore. I am trying to see if I can acquire the contact info of the suppliers. Perhaps in 2008 after recuping, I can attempt to bring the kits in myself.
At this point everyone (but myself) has recieved a majority of their investment. Everyone has taken a hit as well. In my opinion, this should be the end of this thread as its going nowhere anymore. I am trying to see if I can acquire the contact info of the suppliers. Perhaps in 2008 after recuping, I can attempt to bring the kits in myself.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
- slimmyslim1420
- Regular Member
- Posts: 381
- Joined: October 22nd, 2005, 12:22 pm
- Location: Tennessee
Well after recouping and before trying to bring out the kit yourself you should give everyone the other parts you owe them otherwise no one should buy S*** from you. Regardless if you happen to get the kit going or not. I know I will not buy anything from you again nor will I get involved in another GB on this forum because of you. I was planning on buying a body kit from Pakefier and even though that is the only place I have found the kit I will simply do without since I don't wanna do business with you again. Oh sorry about coming on here to say this but yet again you wouldn't respond to my e-mails. Personally I could care less what you are out. The point is you told me you wouldn't screw me as it had happened to me before. To me a man that can't keep his word isn't much man at all.EZ_4_FUN wrote:What I have figured out is that they are more than likely not sending any more parts. The last I recieved were 3 turbos which are going out to offset those involved. Kris, its been in the car for 3 days, but I have not sent it out yet. Today is thanksgiving in Canada, everything is closed.
At this point everyone (but myself) has recieved a majority of their investment. Everyone has taken a hit as well. In my opinion, this should be the end of this thread as its going nowhere anymore. I am trying to see if I can acquire the contact info of the suppliers. Perhaps in 2008 after recuping, I can attempt to bring the kits in myself.
1992 GS ZE swap 94 dash swap drilled and slotted rotors full ceramic pads CS SS clutch and brake lines KL-36 ecu zx-2 tokico struts eibach springs short shifter Tenzo exhaust Hi flow cat 2.5 in piping
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
- Dali
- Supporting Member
- Posts: 1621
- Joined: January 28th, 2003, 2:01 am
- antispam: No
- Location: Williams lake, BC
does not look like anything else is coming, no emails either, i need to know what size of intercooler to get and i cant even get that info. the guy at urban is not even responding anymore, i think everyone should call micheal and harass the s--- out of him to get ahold of abe or get abes contact info so someone can pay him a visit and beat the crap out of him, i would even donate moremoney for that.
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
No Dali , Oscar had a turbo for me in his possession that he was supposed to send to me But I haven't heard anything , and he has not responded to my emails , pm's or messages.
Anyone have Oscars Phone number PM me ?
Thanks
Kris
Anyone have Oscars Phone number PM me ?
Thanks
Kris
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul
- slimmyslim1420
- Regular Member
- Posts: 381
- Joined: October 22nd, 2005, 12:22 pm
- Location: Tennessee
It wouldn't surprise me if we never hear from Oscar again. I mean in my opinion he is the one that owes us not Abe. There was a few times that he said if abe did not come through that he was going to settle it out of his pocket. So much for that. He was just trying to get people off his back for a while. Damn all the BS promises!
1992 GS ZE swap 94 dash swap drilled and slotted rotors full ceramic pads CS SS clutch and brake lines KL-36 ecu zx-2 tokico struts eibach springs short shifter Tenzo exhaust Hi flow cat 2.5 in piping
still a go?
[Admin:removed]
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
Re: still a go?
DOES ANYONE HAVE OSCARS PHONE NUMBER ????? PLEASE PM ME
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA