FS:1993 mx-3 BP Swaped, suspension++++
FS:1993 mx-3 BP Swaped, suspension++++
sorry im not parting out the car, but if someone wants the whole car and all the extra parts you can take it $1500 obo
well i hate to do this but i'm gonna part out my car, i have no time to finish it, some parts were only installed this winter as i thought i was going to put it back on the road. before that my car was stored in my garage for the last 3 years
i will post more items, pics and prices over the next few days, i'm gonna strip this thing, but if someone wants the whole car pm me(150,000kms on car)
Bp 1.8l(60-80,000 km) with ford escort tranny, new exedy mx-6 clutch on resurfaced flywheel, bp ecu and harness
passetter header for bp with about 20 kms - 100 obo
powerstop rotors - front 2 20 km - 80 obo
kvr pads- front 4- 40 obo
corksport blue stainless brake lines for rear drums, front were installed rears are new in bag with hardware - 45 obo
Suspension Techniques springs with new zx2 heavy duty Tokico struts new strut mounts front and rear, new dust coers (about 20kms on the front and 300 kms on rears) -only sell complete- 480obo
2.5" mandrel bent catback with highflow - 340 obo
SE interior panels with passenger side power winder control - 160 obo
rare canadian wrap around spoiler - 120 obo
all srd bushings, short shifter, ................................
plus much more
well i hate to do this but i'm gonna part out my car, i have no time to finish it, some parts were only installed this winter as i thought i was going to put it back on the road. before that my car was stored in my garage for the last 3 years
i will post more items, pics and prices over the next few days, i'm gonna strip this thing, but if someone wants the whole car pm me(150,000kms on car)
Bp 1.8l(60-80,000 km) with ford escort tranny, new exedy mx-6 clutch on resurfaced flywheel, bp ecu and harness
passetter header for bp with about 20 kms - 100 obo
powerstop rotors - front 2 20 km - 80 obo
kvr pads- front 4- 40 obo
corksport blue stainless brake lines for rear drums, front were installed rears are new in bag with hardware - 45 obo
Suspension Techniques springs with new zx2 heavy duty Tokico struts new strut mounts front and rear, new dust coers (about 20kms on the front and 300 kms on rears) -only sell complete- 480obo
2.5" mandrel bent catback with highflow - 340 obo
SE interior panels with passenger side power winder control - 160 obo
rare canadian wrap around spoiler - 120 obo
all srd bushings, short shifter, ................................
plus much more
Last edited by Marlon on February 21st, 2008, 3:54 pm, edited 4 times in total.
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
How much for Suspension Techniques springs with new zx2 heavy duty Tokico struts?
I noticed on your cardomain site you have powerstop rotors/kvr pads. How much for the rear discs/pads if they are in decent shape?
Great looking miata! 300 hp! Show us some more details on that thing if you don't mind. Like a modifications list so we can all drive 300 hp miata's.
I noticed on your cardomain site you have powerstop rotors/kvr pads. How much for the rear discs/pads if they are in decent shape?
Great looking miata! 300 hp! Show us some more details on that thing if you don't mind. Like a modifications list so we can all drive 300 hp miata's.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
se panels
there all a little dirty
the driver side has a cut as seen in the pics, it's an easy fix,
solo2 racing - you guys should come out, it's lot's of fun and newbie friendly
http://solo2.casc.on.ca
there all a little dirty
the driver side has a cut as seen in the pics, it's an easy fix,
solo2 racing - you guys should come out, it's lot's of fun and newbie friendly
http://solo2.casc.on.ca
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
thankstimpronk wrote: Great looking miata! 300 hp! Show us some more details on that thing if you don't mind. Like a modifications list so we can all drive 300 hp miata's.
heres the list
Flyin Miata Turbo upgrade
fm Intake
begi split downpipe 2.5"
fm 2.5" Exhaust
fm/begi intercooler
fm TB inlet pipe
Hydra ECU with Wideband
550cc injectors
Mazdaspeed engine and diff mounts
Turbo XS RFL Blow off valve
vtcs removed
intake gasket
tb coolant bypass
ss brake lines
falken t-615 front - 215/45/17 rear 225/45/17 on powder coated factory wheels
..........
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
-
- Regular Member
- Posts: 522
- Joined: February 7th, 2005, 9:57 pm
- Location: Toronto area
Re: FS: Part out - 1993 mx-3 BP Swaped, suspension++++
if anyone is interested in parts or the whole car pm me
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
-
- Regular Member
- Posts: 576
- Joined: March 24th, 2002, 2:01 am
- Location: Stellarton, Nova scotia, Canada
- Contact:
Re: FS: Part out - 1993 mx-3 BP Swaped, suspension++++
What hood you have on it now? I am looking for one.
- Jovian2k
- Supporting Member
- Posts: 851
- Joined: June 3rd, 2004, 2:01 am
- Location: La Prairie, QC + Stratford, CT
Re: FS: Part out - 1993 mx-3 BP Swaped, suspension++++
any pics of those SS brake lines?
-
- Regular Member
- Posts: 106
- Joined: October 17th, 2006, 12:12 pm
- Location: simcoe
- Contact:
Re: FS: Part out - 1993 mx-3 BP Swaped, suspension++++
hey ive got a list i would like to buy off you... if you still have it
left fender
head lights(depending condition)
A pilllars
radio consol trim.. and some few other interior pieces i just got to see in person
there may be more but id liek to see your whole care first..
if you can get back to me with a price maybe we can arange
left fender
head lights(depending condition)
A pilllars
radio consol trim.. and some few other interior pieces i just got to see in person
there may be more but id liek to see your whole care first..
if you can get back to me with a price maybe we can arange
1992 mx3 gs Klze with Powder coated black Curved neck Manifold. Hot shot performance CAI, ford probe Gt ECU and MAF
http://www.cardomain.com/ride/2197073
http://www.cardomain.com/ride/2197073
Re: FS:1993 mx-3 BP Swaped, suspension++++
sorry im not parting out the car, but if someone wants the whole car and all the extra parts you can take it $1500 obo the parts alone are worth more then that
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project