Picture of..... ????

94mx3precidia · Post by **94mx3precidia** » May 31st, 2007, 3:27 pm

hey, here is a picture of something i pulled out of my steering collum. im not sure what it is. Could it be the car alarms brain??

let me know what you think it is.
thanks.

Post by **Custommx3** » May 31st, 2007, 3:31 pm

YEs, its a Clifford alarm

94mx3precidia · Post by **94mx3precidia** » May 31st, 2007, 3:32 pm

thaught so, how do i get it out? i dont have the remote and the alarm horn isnt hooked up.... i think.

96mx-3 · Post by **96mx-3** » May 31st, 2007, 3:52 pm

i dont have a remote eaither i doubt there is one..i have a little switch and a light...im prity sure thats all it powers lol but i cant kick in a window or sumthinto test it lol

94mx3precidia · Post by **94mx3precidia** » May 31st, 2007, 4:41 pm

i know ther eis a remote, cuz the arrow 3 to 5 all have remotes. what would the switch under my steering colum do? is that to turn the alarm off while its going or is it an engine immobolizer?

ho bag · Post by **ho bag** » May 31st, 2007, 5:01 pm

Get the part number off the alarm, call someone that sells clifford alarm, order a new remote and program it.

There free alarm for you.

94mx3precidia · Post by **94mx3precidia** » May 31st, 2007, 5:08 pm

how do you program a alarm? i dont have any instructions/wiring diagrams for it. i will need to also hook up the alarm's horn. It cant be too hard, there are only 2 wires comming out of the horna nd under my steering collum.

ho bag · Post by **ho bag** » May 31st, 2007, 5:24 pm

its usually not hard, your right on the horn, 2 wires.

Programing it usually consist of something like:

Press valet switch 3 times and hold
When light goes solid arm alarm
after light blinks disarm alarm

done

Now that is just an example, i cant remember all the ones i have done.

PATDIESEL · Post by **PATDIESEL** » May 31st, 2007, 5:28 pm

Call or emial Clifford and they will give you a wiring diagram and remote programming instrustions as well as sell you a new remote or two if you need.

94mx3precidia · Post by **94mx3precidia** » May 31st, 2007, 5:41 pm

what is their website addy?

Clappy · Post by **Clappy** » May 31st, 2007, 10:38 pm

google is your friend....

Hoodzy · Post by **Hoodzy** » May 31st, 2007, 11:03 pm

yahoo is my friend

cbrzx · Post by **cbrzx** » May 31st, 2007, 11:43 pm

I got 2 clifford remotes that might work with your alarm.

Let me know what remote you need.

94mx3precidia · Post by **94mx3precidia** » June 1st, 2007, 9:26 am

cbrzx wrote:I got 2 clifford remotes that might work with your alarm.

Let me know what remote you need.

ya ill do a little research today and ill let ya know.

94mx3precidia · Post by **94mx3precidia** » June 1st, 2007, 10:44 am

ok so i found their website, clifford.com. they have no contact email and only have phone numbers for locations in the U.S.

I dont want to call them cuz their just gunna put me on hold and they will probably have to send me the installation instructions though the mail. Does anyone have installation instructions for the clifford arrow 2 or arrow 3? You could just scan them or something.