Picture of..... ????
- 94mx3precidia
- Regular Member
- Posts: 574
- Joined: May 12th, 2007, 8:00 pm
- Location: Thunder Bay, Ontario
Picture of..... ????
hey, here is a picture of something i pulled out of my steering collum. im not sure what it is. Could it be the car alarms brain??
let me know what you think it is.
thanks.
let me know what you think it is.
thanks.
- 94mx3precidia
- Regular Member
- Posts: 574
- Joined: May 12th, 2007, 8:00 pm
- Location: Thunder Bay, Ontario
- 94mx3precidia
- Regular Member
- Posts: 574
- Joined: May 12th, 2007, 8:00 pm
- Location: Thunder Bay, Ontario
- 94mx3precidia
- Regular Member
- Posts: 574
- Joined: May 12th, 2007, 8:00 pm
- Location: Thunder Bay, Ontario
-
- Regular Member
- Posts: 211
- Joined: May 7th, 2006, 10:01 pm
- Location: Halifax. Nova Scotia
- Contact:
its usually not hard, your right on the horn, 2 wires.
Programing it usually consist of something like:
Press valet switch 3 times and hold
When light goes solid arm alarm
after light blinks disarm alarm
done
Now that is just an example, i cant remember all the ones i have done.
Programing it usually consist of something like:
Press valet switch 3 times and hold
When light goes solid arm alarm
after light blinks disarm alarm
done
Now that is just an example, i cant remember all the ones i have done.
2002 Mazda Protege5 (Turbo kit 75% complete)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
Call or emial Clifford and they will give you a wiring diagram and remote programming instrustions as well as sell you a new remote or two if you need.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- 94mx3precidia
- Regular Member
- Posts: 574
- Joined: May 12th, 2007, 8:00 pm
- Location: Thunder Bay, Ontario
- Hoodzy
- Regular Member
- Posts: 1526
- Joined: February 19th, 2005, 4:15 pm
- Location: Calgary, Alberta
- Contact:
yahoo is my friend
http://www.cardomain.com/id/hoodzy13" onclick="window.open(this.href);return false;
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
- 94mx3precidia
- Regular Member
- Posts: 574
- Joined: May 12th, 2007, 8:00 pm
- Location: Thunder Bay, Ontario
- 94mx3precidia
- Regular Member
- Posts: 574
- Joined: May 12th, 2007, 8:00 pm
- Location: Thunder Bay, Ontario
ok so i found their website, clifford.com. they have no contact email and only have phone numbers for locations in the U.S.
I dont want to call them cuz their just gunna put me on hold and they will probably have to send me the installation instructions though the mail. Does anyone have installation instructions for the clifford arrow 2 or arrow 3? You could just scan them or something.
I dont want to call them cuz their just gunna put me on hold and they will probably have to send me the installation instructions though the mail. Does anyone have installation instructions for the clifford arrow 2 or arrow 3? You could just scan them or something.