//***v6 turbo kit in production...yes!!! for the mx-3***\\
----- Original Message -----
From: Michael>>>Urban Import
To: 'PAKFEIFER TUNING CANADA'
Sent: Tuesday, February 13, 2007 3:42 PM
Subject: RE: Fw: Parts
Oscar,
Sorry for not getting back to you sooner. I have not been able to get a hold of Abe but I went ahead and shipped out the parts today. The UPS tracking # is 1ZT2T3426848228326
Thanks again.
Michael Hinderliter
D2 Racing>>> http://www.d2racing.com
Urban Import>>> http://www.urbanimport.com
-----Original Message-----
From: PAKFEIFER TUNING CANADA [mailto:oscardevesa@sympatico.ca]
Sent: Tuesday, February 13, 2007 2:03 AM
To: slimmyslim1420@comcast.net; Michael>>>Urban Import
Subject: Re: Fw: Parts
Nothing yet. please just bare with me for a little bit more. I know its too much to ask for.
I'm told they would be shipped this week. I spoke with Michael, and he said he was going to send it out (yesterday). I'll email him regarding a tracking!
Oscar Devesa
Canada: http://www.pakfeifercanada.com
U.S.A: http://www.pakfeifertuning.com
----- Original Message -----
From: slimmyslim1420@comcast.net
To: PAKFEIFER TUNING CANADA
Sent: Monday, February 12, 2007 11:09 PM
Subject: Re: Fw: Parts
So did you ever find out if these parts did infact ship? Or have you maybe recieved them yet? Or any other news at all?
-------------- Original message --------------
From: "PAKFEIFER TUNING CANADA" <oscardevesa@sympatico.ca>
I was told over the phone that there are indeed exhaust housings.
Oscar Devesa
Canada: http://www.pakfeifercanada.com
U.S.A: http://www.pakfeifertuning.com
----- Original Message -----
From: slimmyslim1420@comcast.net
To: PAKFEIFER TUNING CANADA
Sent: Wednesday, January 31, 2007 7:13 PM
Subject: Re: Fw: Parts
Did those turbos have the exhaust side on them? Its hard to tell from the pic.
-------------- Original message --------------
From: "PAKFEIFER TUNING CANADA" <oscardevesa@sympatico.ca>
This is the simplest way to get the pic to you guys.
Not much I realize that, but there is an attempt which at this point is the best I can say. Suing or filing charges will not get us far, I promise. I ask that everyone continues to be open minded and understanding at this point and bare with the process.
With 2 cores and 2 more turbos on the way, I can send out 2 more complete kit, less of course the bits n bolts and fans. I will send these "close to complete kits" to Jeremy and Damon as soon as these pictured parts arrive.
Kris, I can send you the pipes I still have and the remaining parts as they arrive.
This is the best I can offer at this point.
Oscar Devesa
Canada: http://www.pakfeifercanada.com
U.S.A: http://www.pakfeifertuning.com
----- Original Message -----
From: Michael>>>Urban Import
To: 'PAKFEIFER TUNING CANADA'
Sent: Wednesday, January 24, 2007 5:13 PM
Subject: Parts
Oscar,
This afternoon Abes brother came by and dropped off 2 turbos and intercooler cores as pictured. He claims Abe will have more parts by Friday and is coming by to ship them all out. I know this isn’t GREAT but at the least 2 turbos and intercooler cores are in my possession.
Michael Hinderliter
D2 Racing>>> http://www.d2racing.com
Urban Import>>> http://www.urbanimport.com
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
any word on ol boy getting the rest of the stuff that he is owing or am i gonna have to take a few days off work and go bash some heads?
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
oscar any word when the pipes will be shipped out , i see that you have recieved the packages , what all was included ?
thanks
kris
thanks
kris
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul![Very Happy :D](./images/smilies/icon_biggrin.gif)
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
ditto
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
i havnt had internet for weeks and there is no updates?
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
-
- Regular Member
- Posts: 151
- Joined: February 22nd, 2006, 3:41 pm
- Location: St. Thomas
So far i've paid $800CAD for my hot pipes turbo BOV,WG,FMIC,2.5" IC piping
I feel bad for you guys!....its bad enough you paid $2800 us for the kit.....but you haven't even got it a year and a half later\
I feel bad for you guys!....its bad enough you paid $2800 us for the kit.....but you haven't even got it a year and a half later\
2006 best ET 14.43 @ 96.9mph
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
were you actually expecting any progress? i don't even know why i keep checking this everyday.papa roached wrote:i havnt had internet for weeks and there is no updates?
klze swap, wisco 8.5 comp pistons, pauter rods, act stage 3 clutch, lightened flywheel, UR racing pulley, flex-o-lite oil cooler, 2.5" custom exhaust with high flow cat, B&M short throw shifter, S&R cross drilled rotors, , B&G lowering springs, maxxim 17" gun metal rims, modded nissan injectors, walbro 255 lph fuel pump, areomotive afpr, msd 6a , magasquirt v3, and turboed
-
- Junior Member
- Posts: 11
- Joined: March 2nd, 2007, 6:40 pm
- Contact:
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
*Waves Jedi hand* You dont want in on this group buy....escortracingny wrote:So is this even worth lookin into?
not to go off topic but who sells the turbo piping and manifolds for a mx3 v6
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
-
- Junior Member
- Posts: 11
- Joined: March 2nd, 2007, 6:40 pm
- Contact:
-
- Regular Member
- Posts: 151
- Joined: February 22nd, 2006, 3:41 pm
- Location: St. Thomas
You might as well just take your money and burn it.......you atleast get to watch it burn hahahaescortracingny wrote:So is this even worth lookin into?
not to go off topic but who sells the turbo piping and manifolds for a mx3 v6
2006 best ET 14.43 @ 96.9mph
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T