//***v6 turbo kit in production...yes!!! for the mx-3***\\

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
User avatar
Tommy D
Regular Member
Posts: 151
Joined: August 24th, 2005, 2:41 pm
Location: Cornwall, England

Post by Tommy D »

Its gone quiet again.......Im sure Oscar is trying all he can, lets hope Abe isnt messing about
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

----- Original Message -----
From: Michael>>>Urban Import
To: 'PAKFEIFER TUNING CANADA'
Sent: Tuesday, February 13, 2007 3:42 PM
Subject: RE: Fw: Parts


Oscar,


Sorry for not getting back to you sooner. I have not been able to get a hold of Abe but I went ahead and shipped out the parts today. The UPS tracking # is 1ZT2T3426848228326



Thanks again.



Michael Hinderliter

D2 Racing>>> http://www.d2racing.com

Urban Import>>> http://www.urbanimport.com

-----Original Message-----
From: PAKFEIFER TUNING CANADA [mailto:oscardevesa@sympatico.ca]
Sent: Tuesday, February 13, 2007 2:03 AM
To: slimmyslim1420@comcast.net; Michael>>>Urban Import
Subject: Re: Fw: Parts



Nothing yet. please just bare with me for a little bit more. I know its too much to ask for.



I'm told they would be shipped this week. I spoke with Michael, and he said he was going to send it out (yesterday). I'll email him regarding a tracking!





Oscar Devesa

Canada: http://www.pakfeifercanada.com
U.S.A: http://www.pakfeifertuning.com

----- Original Message -----

From: slimmyslim1420@comcast.net

To: PAKFEIFER TUNING CANADA

Sent: Monday, February 12, 2007 11:09 PM

Subject: Re: Fw: Parts



So did you ever find out if these parts did infact ship? Or have you maybe recieved them yet? Or any other news at all?



-------------- Original message --------------
From: "PAKFEIFER TUNING CANADA" <oscardevesa@sympatico.ca>

I was told over the phone that there are indeed exhaust housings.





Oscar Devesa

Canada: http://www.pakfeifercanada.com
U.S.A: http://www.pakfeifertuning.com

----- Original Message -----

From: slimmyslim1420@comcast.net

To: PAKFEIFER TUNING CANADA

Sent: Wednesday, January 31, 2007 7:13 PM

Subject: Re: Fw: Parts



Did those turbos have the exhaust side on them? Its hard to tell from the pic.



-------------- Original message --------------
From: "PAKFEIFER TUNING CANADA" <oscardevesa@sympatico.ca>

This is the simplest way to get the pic to you guys.



Not much I realize that, but there is an attempt which at this point is the best I can say. Suing or filing charges will not get us far, I promise. I ask that everyone continues to be open minded and understanding at this point and bare with the process.



With 2 cores and 2 more turbos on the way, I can send out 2 more complete kit, less of course the bits n bolts and fans. I will send these "close to complete kits" to Jeremy and Damon as soon as these pictured parts arrive.



Kris, I can send you the pipes I still have and the remaining parts as they arrive.



This is the best I can offer at this point.



Oscar Devesa

Canada: http://www.pakfeifercanada.com
U.S.A: http://www.pakfeifertuning.com

----- Original Message -----

From: Michael>>>Urban Import

To: 'PAKFEIFER TUNING CANADA'

Sent: Wednesday, January 24, 2007 5:13 PM

Subject: Parts



Oscar,


This afternoon Abes brother came by and dropped off 2 turbos and intercooler cores as pictured. He claims Abe will have more parts by Friday and is coming by to ship them all out. I know this isn’t GREAT but at the least 2 turbos and intercooler cores are in my possession.



Michael Hinderliter

D2 Racing>>> http://www.d2racing.com

Urban Import>>> http://www.urbanimport.com

OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Post by papa roached »

any word on ol boy getting the rest of the stuff that he is owing or am i gonna have to take a few days off work and go bash some heads?
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

oscar any word when the pipes will be shipped out , i see that you have recieved the packages , what all was included ?
thanks
kris
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Post by papa roached »

ditto
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
User avatar
Dali
Supporting Member
Posts: 1621
Joined: January 28th, 2003, 2:01 am
antispam: No
Location: Williams lake, BC

Post by Dali »

any updates?
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Post by papa roached »

i havnt had internet for weeks and there is no updates?
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

Yeah :roll:
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
mazdaspeedmx_3
Regular Member
Posts: 151
Joined: February 22nd, 2006, 3:41 pm
Location: St. Thomas

Post by mazdaspeedmx_3 »

So far i've paid $800CAD for my hot pipes turbo BOV,WG,FMIC,2.5" IC piping
I feel bad for you guys!....its bad enough you paid $2800 us for the kit.....but you haven't even got it a year and a half later\
2006 best ET 14.43 @ 96.9mph
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
User avatar
mx3stylez
Regular Member
Posts: 114
Joined: October 31st, 2005, 4:56 pm
Location: edmonton, alberta

Post by mx3stylez »

papa roached wrote:i havnt had internet for weeks and there is no updates?
were you actually expecting any progress? i don't even know why i keep checking this everyday.
klze swap, wisco 8.5 comp pistons, pauter rods, act stage 3 clutch, lightened flywheel, UR racing pulley, flex-o-lite oil cooler, 2.5" custom exhaust with high flow cat, B&M short throw shifter, S&R cross drilled rotors, , B&G lowering springs, maxxim 17" gun metal rims, modded nissan injectors, walbro 255 lph fuel pump, areomotive afpr, msd 6a , magasquirt v3, and turboed
escortracingny
Junior Member
Posts: 11
Joined: March 2nd, 2007, 6:40 pm
Contact:

Post by escortracingny »

So is this even worth lookin into?
not to go off topic but who sells the turbo piping and manifolds for a mx3 v6
User avatar
cjthor
Forum Moderator
Posts: 5018
Joined: November 26th, 2000, 2:01 am
Location: Portland Oregon
Contact:

Post by cjthor »

escortracingny wrote:So is this even worth lookin into?
not to go off topic but who sells the turbo piping and manifolds for a mx3 v6
*Waves Jedi hand* You dont want in on this group buy....
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
User avatar
Dali
Supporting Member
Posts: 1621
Joined: January 28th, 2003, 2:01 am
antispam: No
Location: Williams lake, BC

Post by Dali »

is there anyone close enough to pay him a visit, i would almost offer someone something to go knock his head in abit at this point (but that would be illegal and bad). seriously someone go talk to him. im not missing out another year of driving my car.
escortracingny
Junior Member
Posts: 11
Joined: March 2nd, 2007, 6:40 pm
Contact:

Post by escortracingny »

If hes near NY me and some local escort owners can bash his head in.

hehehe!!!
mazdaspeedmx_3
Regular Member
Posts: 151
Joined: February 22nd, 2006, 3:41 pm
Location: St. Thomas

Post by mazdaspeedmx_3 »

escortracingny wrote:So is this even worth lookin into?
not to go off topic but who sells the turbo piping and manifolds for a mx3 v6
You might as well just take your money and burn it.......you atleast get to watch it burn hahaha
2006 best ET 14.43 @ 96.9mph
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
Post Reply

Return to “Forced Induction”