b6t tranny

Dovid · Post by **Dovid** » January 29th, 2007, 5:49 pm

hi !!

I bought recently a b6t motor.... I have bought escort GT axle but its not the good one.....

is this the same axle on the b6de and b6t cars ???

(I speak french... so I dont know if "axles" is the good world... in french its "cardan")

thanks all

95 rs · Post by **95 rs** » January 29th, 2007, 9:51 pm

no they are not the same. the b6t ones are a bit bigger if i do recall.

Dovid · Post by **Dovid** » January 30th, 2007, 12:34 am

ok.... so what kind of axle will fit on my mx-3 ??? the mx-3 sohc axle???

please help me

Dovid · Post by **Dovid** » January 31st, 2007, 12:02 am

anyone know what king of Cardan joints I have to buy for my b6t ??? please help me

95 rs · Post by **95 rs** » February 2nd, 2007, 8:42 am

i wouldnt use a b6t tranny since its not a hydraulic clutch and it would need alot of fabrication to make it work. i would just use a protege lx tranny. it would be alot easier.

Dovid · Post by **Dovid** » February 2nd, 2007, 2:53 pm

yes but all the conversion is done .... so I have to find cardans for this cable tranny

95 rs · Post by **95 rs** » February 2nd, 2007, 6:59 pm

you might have to take a mx3 shaft and take the shaft that goes into the hub and put it on to a b6t axel. i donno i had a b6t tranny and got a pro lx.

Dovid · Post by **Dovid** » February 2nd, 2007, 8:10 pm

do you know what king of tranny is it???

95 rs · Post by **95 rs** » February 2nd, 2007, 8:17 pm

what tranny? the pro lx or the b6t? im pretty sure the b6t was a g series transmission.

Dovid · Post by **Dovid** » February 2nd, 2007, 8:23 pm

now... I dont know what kind of transmission is it........its certainly not a 323 gtx transmission because they are 4x4 ......... and its not a escort GT tramission because the cardan joint was to long(passenger side) and to short (driver side)......

I really dont know what is the problem

95 rs · Post by **95 rs** » February 2nd, 2007, 8:51 pm

it looks like the b6t tranny...... it looks like the one that came with the b6t i had. im sure that if you swap the ends off the axels it should work. unless you can check to see if the ends off the b6t transmission will fir through the plines on your hubs.

Dovid · Post by **Dovid** » February 2nd, 2007, 9:25 pm

ok I have make an error....... I said "cardan joint" but the good word I have to say its "axle"......

so i need axle to fit on this tranny and on the mx-3.........

95rs...... what kind of axle do you have if we have the same transmission ???

(scuse me for the error but my english is very bad......

)

Dovid · Post by **Dovid** » February 3rd, 2007, 2:41 pm

I have to take the axle of a 323?? escort GT?? mx-3?? protege??

95 rs · Post by **95 rs** » February 3rd, 2007, 8:24 pm

i dont have that transmission. i used a pro lx transmission and well there is alot of information on it in this site. i didnt use the b6t transmission since i did not want to convert it to hydraulic.

Dovid · Post by **Dovid** » February 5th, 2007, 12:29 am

ok ok ...so ... if a protege lx transmission fit on this engine ....... I have to take escort GT axle........ but they don't fit......

one of my friend said that the Canadian tire sold me the SOHC one of the escort GT .... this is the reason why they dont fit!

is this possible???

thanks