why is my motor really hot???
-
- Regular Member
- Posts: 1088
- Joined: April 8th, 2006, 9:21 am
- Contact:
why is my motor really hot???
the temp gauge in my gauge cluster says its normal but my motor is abnormally hot, its heating bolts up so if i barely even turn them they snap, i just got a new cooling fan switch too. im thinking about hooking my fans up to a in car switch so i can always keep them on.
- mr1in6billion
- Supporting Member
- Posts: 961
- Joined: August 28th, 2005, 9:06 pm
- Location: Fog City
Re: why is my motor really hot???
Are you working on your car while it's still hot?mazdamx3sohc wrote:My motor is abnormally hot, its heating bolts up so if i barely even turn them they snap
-
- Regular Member
- Posts: 1088
- Joined: April 8th, 2006, 9:21 am
- Contact:
mazdamx3sohc wrote:the stock temp gauge stays in the normal right in the middle, but i think my timing is off cuz i can hear a whining sound. no i dont mean from working on it, i notice when i check my oil or whatever.
We need a better idea of what your asking, motors operate at over 200 degress F. Also the harder you drive the more heat it will give off, If you work on a motor when its still hot it will break bolts because of the diffrent exspansion rates of the metals.
I would bet one of your belts is over tigheted if your hearing a whining sound, sounds almost like a super charger.
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 1088
- Joined: April 8th, 2006, 9:21 am
- Contact:
-
- Regular Member
- Posts: 1088
- Joined: April 8th, 2006, 9:21 am
- Contact:
Its really easy tp get carried away and over tighten them, after its tightend you want to be able to twist the belt about half a turn, if you cant its usually to tight. Too loose is better than too tight as well, it destorys the blet, if its too tight it will destory the alternantor.
-torp.
I don't own a Mazda.
I don't own a Mazda.