[FS] pacesetter headers second gen, and lots more
[FS] pacesetter headers second gen, and lots more
Im selling a set of second gen pacesetter headers they are in great shape and painted black. they have about 900 km on them. please email me or call me if you want to come see them or if you want pics. 647 298 2617
i also have two powerdyne supercharges for sale...one is a BD10 polished and internally built to hold 18psi... the other is a BD11A, a monster charger. i also have two supercharger kits for sale with belts and pullies. i made about 300whp with the kit on a ZE with a standalone. to be sold as a kit or seperate.
...also i have two fenders pass and driver side, green in great shape and a POLI steering wheel that have to go...very reasonable with prices so please call me or email me
thanks guys and gals
ryan
i also have two powerdyne supercharges for sale...one is a BD10 polished and internally built to hold 18psi... the other is a BD11A, a monster charger. i also have two supercharger kits for sale with belts and pullies. i made about 300whp with the kit on a ZE with a standalone. to be sold as a kit or seperate.
...also i have two fenders pass and driver side, green in great shape and a POLI steering wheel that have to go...very reasonable with prices so please call me or email me
thanks guys and gals
ryan
klze, custome supercharger setup, powerdyne BD 10 charger, holly fuel pump, full stand alone fuel managment (SDS) MSD ignition with blaster coil and much more..
The moderators will be telling you to read the sticky and post prices. I'd like to know how much the headers are going for. Can you send me pics to my email, please.
Thanks
Thanks
'93 GS, Curved neck KLZE, KL36 ECU, B&M STS, complete SRD shifter bushings, mx-6 clutch, ZX2 struts, Apex springs... and building...
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Man your still around? I haven't seen or heard anything from you in ages! You know, you should post up info on your SC setup, there's a few local guys looking at doing a supercharger but there's no much info on it.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
hahaha iv been busy, nice to hear from you!! the car is all new from paint to interrior and everything in the engine bay. Im selling all my old stuff. i have two colplete supercharger kits for sale but i perfer to send pics or for people to come and see rather than post. i havnt decided about prices yet cause i wanna make sure the bearings are still good and give a good check of everything. also im not good at computers and i always mess up posting pics. so its easier for me to do it this way.
email me if you wants pics please, thanks and talk to you later
ryan
email me if you wants pics please, thanks and talk to you later
ryan
klze, custome supercharger setup, powerdyne BD 10 charger, holly fuel pump, full stand alone fuel managment (SDS) MSD ignition with blaster coil and much more..
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Man, i'd love to come by to check it out, but it's getting a tad cold for meets, that and I'm out of the country working, I come back once in a while but I'll be back in at ImportFest, I'll be there showing off the car with SlipStream (pending weather if it doesn't snow and I can drive it up). It's just 'a little' different that you may (if you do) remember it.
Oh, and just one thing, edit the FS... to [FS], the mods may ask you to change it. Just a heads up.
Oh, and just one thing, edit the FS... to [FS], the mods may ask you to change it. Just a heads up.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
send pics to mitmaks@yahoo.com
how much would be s/c kit ?
how much would be s/c kit ?
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
i have to check over the drive system to see if the bearings are good and pullies are balanced and then ill make a price, depends if the bearings need to be replaced or not...i have two kits...ones used wet bearings and one uses dry bearings. both kits include charger mounting brackets. i am selling the mounting brackets for $80, but if somebody just wants one of the the chargers ill get rid of the mounting brackets for cheaper, im reasonable, lol
thanks
thanks
klze, custome supercharger setup, powerdyne BD 10 charger, holly fuel pump, full stand alone fuel managment (SDS) MSD ignition with blaster coil and much more..
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
hey.how was it supercharged? using a shaft? if so sell me the shaft
pics of your set up? hgallegos915@msn.com
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
how much for s/c kit
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)
http://www.cardomain.com/id/mitmaks
![Image](http://img66.exs.cx/img66/9841/390777787yt.jpg)