1992 MX-3
Klze:
True ZE with a curved neck swapped onto it
all new timing belt, Water pump, o2 sensors, accesory Belts, hoses, etc..
Pheno Spacers (IM & TB)
GM HEI mod
PGT fuel filter
Intake
axle back exhaust
Off road pipe
a/c and p/s completley removed for weight
stage 2 clutch
resurfaced k8 flywheel
b&m short shifter
polyurethane filled motor mounts
new drivers axle
Suspension Tech springs (1.5 in drop)
tokico struts (drilled out perch to fit properly)
axxis 17 inch touring cup rims
kuhmo 205-40-17 tires with plenty of tread
could be forgetting some stuff, email me if your interested...
Asking price is 3k O.B.O.
static_x_@hotmail.com
[/img]
[FS]MX3 w/ KLZE
- GreenMachine
- Regular Member
- Posts: 91
- Joined: December 6th, 2003, 2:01 am
- Location: Oakley
[FS]MX3 w/ KLZE
Last edited by GreenMachine on November 3rd, 2006, 1:11 am, edited 2 times in total.
'92 GS-no lip. Klze. no cat. phenolic spacers. no power steering. no a/c. hei mod. poly filled mounts. probinator chip. loud exhaust. b&m shifter. tokico struts. suspension tech springs. axxis 17 in rims.
'86 mr2-stock and still hauls a-- in curves.
'05 Gsxr-50 tooth stunt bike
'86 mr2-stock and still hauls a-- in curves.
'05 Gsxr-50 tooth stunt bike
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
please fix ur topic
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
WOW 3000 for a ze mx3.. thats a steal.. if i could have come across this before my set up..
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
where you located and how many km's on the engine/body?
1995 MX-3 RS: ST lowering springs, Front & Rear Strut Bars, 95 GS spoiler, ACT Stage 1 Cltuch kit, B&M Short Throw, Corksport braided steal clutch line, Corksport bronze oil bushings, 17 inch BSA rims, Tint, Chrome Altezza's
Pics http://www.cardomain.com/ride/537422/1
Pics http://www.cardomain.com/ride/537422/1
- GreenMachine
- Regular Member
- Posts: 91
- Joined: December 6th, 2003, 2:01 am
- Location: Oakley
the honda center caps were pulled off of a stock honda rims and painted white before I bought them. You could just unscrew the caps and leave it open or you can get replacement caps from adr becasue they manufacuter rims with the same size center cap as these. there is 150,xxx on the body and 40.xxx on the motor. only have 1000 miles since the swap. any more questions keep em comin!
'92 GS-no lip. Klze. no cat. phenolic spacers. no power steering. no a/c. hei mod. poly filled mounts. probinator chip. loud exhaust. b&m shifter. tokico struts. suspension tech springs. axxis 17 in rims.
'86 mr2-stock and still hauls a-- in curves.
'05 Gsxr-50 tooth stunt bike
'86 mr2-stock and still hauls a-- in curves.
'05 Gsxr-50 tooth stunt bike
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener