[FS]MX3 w/ KLZE

GreenMachine · Post by **GreenMachine** » November 2nd, 2006, 2:37 am

1992 MX-3
Klze:
True ZE with a curved neck swapped onto it
all new timing belt, Water pump, o2 sensors, accesory Belts, hoses, etc..
Pheno Spacers (IM & TB)
GM HEI mod
PGT fuel filter
Intake
axle back exhaust
Off road pipe
a/c and p/s completley removed for weight
stage 2 clutch
resurfaced k8 flywheel
b&m short shifter
polyurethane filled motor mounts
new drivers axle

Suspension Tech springs (1.5 in drop)
tokico struts (drilled out perch to fit properly)
axxis 17 inch touring cup rims
kuhmo 205-40-17 tires with plenty of tread
could be forgetting some stuff, email me if your interested...

Asking price is 3k O.B.O.
static_x_@hotmail.com

[/img]

monty73741 · Post by **monty73741** » November 2nd, 2006, 9:29 am

please fix ur topic

hgallegos915 · Post by **hgallegos915** » November 2nd, 2006, 10:41 pm

WOW 3000 for a ze mx3.. thats a steal..

if i could have come across this before my set up..

mx3autozam · Post by **mx3autozam** » November 3rd, 2006, 1:15 am

whats with the Honda center caps?

Bigg E · Post by **Bigg E** » November 3rd, 2006, 12:31 pm

where you located and how many km's on the engine/body?

GreenMachine · Post by **GreenMachine** » November 3rd, 2006, 2:10 pm

the honda center caps were pulled off of a stock honda rims and painted white before I bought them. You could just unscrew the caps and leave it open or you can get replacement caps from adr becasue they manufacuter rims with the same size center cap as these. there is 150,xxx on the body and 40.xxx on the motor. only have 1000 miles since the swap. any more questions keep em comin!

mx3autozam · Post by **mx3autozam** » November 3rd, 2006, 2:47 pm

still didn't answer the big question of where are you loacted!!

2fazed · Post by **2fazed** » November 3rd, 2006, 5:07 pm

He lives in Oakley California.