Decided to take her to the Dyno (tomorrow 10/19/06)
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
Decided to take her to the Dyno (tomorrow 10/19/06)
Ok well I decided to take the baby to the dyno tomorrow and see what she got....anyway heres my short list of mods, what do you guys think i'll hit
KLZE (seems to be running quite strong, no major problems whatsoever)
Pacesetter Ceramic Coated Headers
Hi-Flow Cat and Hi-Flow Resonater
2.5 inch the whole way back
Air Intake down in the hole of doom! lol
(had to edit)
KL36 ECU on 93 Octane all the time
As you can see, not much, i know, it's becuase my next big step is well that, a big step, i'll be doing the turbo kit install with msd igition and hal(stand-alone)
Kinda wish I had the fidanza installed now but it will have to wait for the turbo install
Anyway, what do you guys think I should be hitting....
KLZE (seems to be running quite strong, no major problems whatsoever)
Pacesetter Ceramic Coated Headers
Hi-Flow Cat and Hi-Flow Resonater
2.5 inch the whole way back
Air Intake down in the hole of doom! lol
(had to edit)
KL36 ECU on 93 Octane all the time
As you can see, not much, i know, it's becuase my next big step is well that, a big step, i'll be doing the turbo kit install with msd igition and hal(stand-alone)
Kinda wish I had the fidanza installed now but it will have to wait for the turbo install
Anyway, what do you guys think I should be hitting....
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
- Custom_V6_Limited_SE
- Regular Member
- Posts: 508
- Joined: October 11th, 2005, 12:58 pm
- Location: Spring Hill, FL
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
oo our numbers and mods are almost the same.. you are getting a few more ponies .. what is your altitude? mine was done with 86 octane !! LOL
I did 162 whp and 150 torque. I dont have 2.5 piping tho..
nice numbers
Shows me we are at almost same ball park i was worried something was wrong with my ze.
Dont you love the noise the car makes at high rpms on thedyno? BROOOOOOOOOOM
Post dyno sheets, i wanna compare af ratio and power curve.
Maybe i should get that ecu u got and vaf, its only a 3 hp diff tho so i dunno if i should.
I did 162 whp and 150 torque. I dont have 2.5 piping tho..
nice numbers
Shows me we are at almost same ball park i was worried something was wrong with my ze.
Dont you love the noise the car makes at high rpms on thedyno? BROOOOOOOOOOM
Post dyno sheets, i wanna compare af ratio and power curve.
Maybe i should get that ecu u got and vaf, its only a 3 hp diff tho so i dunno if i should.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
lol hec, those werent my numbers they were someone elses, i hope to be around 175whp....
EXCEPT FOR THE GGGGAAAAYYY fact that I will be dynoing on a mustang dyno which range from 12-25% lower than a dynojet numbers (the numbers most people post up)
EXCEPT FOR THE GGGGAAAAYYY fact that I will be dynoing on a mustang dyno which range from 12-25% lower than a dynojet numbers (the numbers most people post up)
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
aw i was already excited LOL why is that dyno rated less?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
heh i just did a bunch of research on that subject...
The mustang dyno factors in the weight of the car and also produces a load on the tires (it actually simulates driving on the strip)
A dynojet doesn't factor weight or anything (the rollers just spin lol)
The mustang dyno factors in the weight of the car and also produces a load on the tires (it actually simulates driving on the strip)
A dynojet doesn't factor weight or anything (the rollers just spin lol)
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
thats really good for JWM though, as far as I can tell you still have the KLDE don't ya JW
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
no its a ze...
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Damn, and i dyno'd 170 WHP on a mustang dyno with a intake, SS Autochrome headers, 2.5" Header backLooseChangeRacing wrote:heh i just did a bunch of research on that subject...
The mustang dyno factors in the weight of the car and also produces a load on the tires (it actually simulates driving on the strip)
A dynojet doesn't factor weight or anything (the rollers just spin lol)
***D-Tuned Custom KL MX-3 on Nitrous***
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
the mustang dynos can be turned into dynojets so they might of done that for you, but if you hit 170 with pretty much the exact same setup as me then I should be able to see between 170-175 for the fact of pacesetter headers have the best flow and especially since mine our coated and trust me they don't heat up very much, my ze actually runs below normal operating temp unless it's extremely hot out...(above 90 degrees)
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Nah, they showed me what the car would make on a dynojet...it was more but i don't remember the actual numbers...since i ran my car on the bottle after that and made abou 260 WHP..and they didn't even redline it...and were saying on a dynojet i would see 280 Peak power easy.
***D-Tuned Custom KL MX-3 on Nitrous***
- JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
those arent my numbers that was my guesstimate to what you would pull with bascially ze with intake/exhaust (im changing the hp one though )LooseChangeRacing wrote:thats really good for JWM though, as far as I can tell you still have the KLDE don't ya JW
youre right I do have a klde, havent been to the dyno yet
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
Ok i believe I got screwed on my car that I bought 4 months ago....from what I see here, either something is MAJORLY wrong, or this is a DE, I'm pulling it tomorrow and checking not only the block but the cams....
http://www.casperandstick.com/mx3.jpg
http://www.casperandstick.com/mx3.jpg
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact: