something funny from the mx-3 my space board
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
something funny from the mx-3 my space board
well i run a mx-3 my group....not much actvity...some dumb guys says he has a proble turbo kit & its a direct bolt on & fits in the engine bay of the mx.....lol funny thing is that if that were true then i think we all would have probe turbo kits on our v6 mx's
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
as of today, none of the turbo kits for probe fit without modding anything in the mx-3 engine bay
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
I know that.......thats the funny part.......... LOL this kid says he has a turbo kit on his mx with a klze & can run more than 7 psi. He really got mad when i told him the kl03 has better compression for a turbo so he can run higher boost & get more HPbabyblueMX3 wrote:as of today, none of the turbo kits for probe fit without modding anything in the mx-3 engine bay
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
well I've seen people run 10psi on their klze and it held. Not sure for how long though but it can withstand it in some cases.monty73741 wrote:I know that.......thats the funny part.......... LOL this kid says he has a turbo kit on his mx with a klze & can run more than 7 psi. He really got mad when i told him the kl03 has better compression for a turbo so he can run higher boost & get more HPbabyblueMX3 wrote:as of today, none of the turbo kits for probe fit without modding anything in the mx-3 engine bay
low compression doesn't necessarly means higher hp output. The higher the compression is the more hp per psi it'll make. So it's pretty much even. A klze on 6 psi could yeld the same power as 8-9 on a klde. Don't quote me on the numbers though.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
That car on myspace is mine and yes I have a probe turbo kit on there. I'm not the only one either. A guy on here with the screenname Andy has a K8 that he used a Probe turbo kit on.
I bought the hot pipes off of eBay and the probe intercooler kit. The hot pipes bolt right up. The IC kit I bought intentionally to hack up and make my cold pipes out of. It worked surprisingly well.
As for boost level it's currently at 9psi tuned with MS. Trying to get to the track this Sunday. When I have some times I'll report back.
I bought the hot pipes off of eBay and the probe intercooler kit. The hot pipes bolt right up. The IC kit I bought intentionally to hack up and make my cold pipes out of. It worked surprisingly well.
As for boost level it's currently at 9psi tuned with MS. Trying to get to the track this Sunday. When I have some times I'll report back.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
I only posted on the myspace board because you were filling everyone's heads with a ton of misinformation. It was really amusing to me as I posted proven facts that you would reply with outdated inaccurate knowledge. I thought you were posting all the inaccurate data just for fun to mess with the new people.monty73741 wrote: I know that.......thats the funny part.......... LOL this kid says he has a turbo kit on his mx with a klze & can run more than 7 psi. He really got mad when i told him the kl03 has better compression for a turbo so he can run higher boost & get more HP
If you or anyone else wants full details on how everything was done on my MX3 PM me. I'm not about to write a howto novel, but specific questions are welcome.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
This is the only one I have. Next time I have the car out I'll try and take some more for you guys. Some of the random crap in there is from when I threw it all together. I had to move out of state and had to rush my turbo project before I lost the garage. When I get another place to work on it I'll take it all apart and make the pipes pretty. When I originally installed it kept my AC intact just to see if I could do it. About a month later I removed the AC because I don't use it and wanted to lose some weight.
Here's a pic of the other member of this board I mentioned that has the probe kit on his K8
You can actually see both MX3s in this pic.
More pics from the meet where those pics were taken can be found here.
http://www.mx3ze.com/gallery/v/FlyrtleF ... dness2006/
Here's a pic of the other member of this board I mentioned that has the probe kit on his K8
You can actually see both MX3s in this pic.
More pics from the meet where those pics were taken can be found here.
http://www.mx3ze.com/gallery/v/FlyrtleF ... dness2006/
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
An easier way to look at compression and boost is the higher the compression the smaller the margin of error when tuning. I never disagreed that a KLDE is a little easier to boost. I negated the statement that you cannot boost a ZE.babyblueMX3 wrote:well I've seen people run 10psi on their klze and it held. Not sure for how long though but it can withstand it in some cases.monty73741 wrote: I know that.......thats the funny part.......... LOL this kid says he has a turbo kit on his mx with a klze & can run more than 7 psi. He really got mad when i told him the kl03 has better compression for a turbo so he can run higher boost & get more HP
low compression doesn't necessarly means higher hp output. The higher the compression is the more hp per psi it'll make. So it's pretty much even. A klze on 6 psi could yeld the same power as 8-9 on a klde. Don't quote me on the numbers though.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
he wasn't saying you can't put a probe kit on it is just that everyone who has done it before said it required modification to fit right.... that is interesting to know you installed it with no modifications at all.... those turbs look pretty nice by the way... good job on the installs
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
his exact comment was
There was just a ton of inaccurate information on the myspace thread. The only reason I kept posting was to prevent the new guys from going down the wrong path. I've done a lot of experiemnting and found some successful combinations.
A great deal of the info Monty (Jason) was posting is either outdated or simply wrong. For someone that is knowledgeable about the MX3 and K series engines I would expect more up to date responses.
"Won't fit in the engine bay" certainly implies it won't work.Monty73741 on MySpace wrote:
the kit will work but wont fit in the engine bay
There was just a ton of inaccurate information on the myspace thread. The only reason I kept posting was to prevent the new guys from going down the wrong path. I've done a lot of experiemnting and found some successful combinations.
A great deal of the info Monty (Jason) was posting is either outdated or simply wrong. For someone that is knowledgeable about the MX3 and K series engines I would expect more up to date responses.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
omg that looks so sexy.. maybe i would do this instead od SC.. the pipes aren not that pricey on ebay. What about the headers? i failed to understand that..
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
Not sure what your question is regarding headers. The primaries do come with the kit.hgallegos915 wrote:omg that looks so sexy.. maybe i would do this instead od SC.. the pipes aren not that pricey on ebay. What about the headers? i failed to understand that..
It looks like they bolt up the the regular SSA headers and the authentic hot shots. I've installed 2 of these setups and one of them had hot shots. I didn't even have to remove the primaries. Everything just bolted right up.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
yeah that was my question.. wow almost bolt up I can buy the pipes and sell the complete header set.. almost pay themselves off. I wish someone would just sell the downpipes and that :/ (exept headers)
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!