[FS] low 13 second high 12 second mx-3 parts. PART OUT

Tyler17rose · Post by **Tyler17rose** » September 16th, 2006, 2:52 pm

Well nitrous took out my motor last night. The car was running low 13's high 12's. Im done with it and am moving on to my RX-7. So heres the list of parts. All parts are in cnd funds and im located in Ottawa, Canada.

- Mx-3 CF hood, original cnd group buy $400

- Custom audi bixenon projector headlights (REAL HID'S), hella ballasts, hella FF50 driving lights, all in custom mx-3 housings. Custom headlight wiring harness: $400

- Custom Stainless mandrel bent 2.5inch exhaust from headers back. Gutted 2.5inch cat (pipe through it), Thermal Resonater, Racing Beat 2.5inch muffler, over axel, hangs on stock hangers. $400

- SS autochrome version 2 headers (flex pipe) Stainless steel, good shape. $200

- Momo steering wheel hub for mx-3 $45

- B&G springs, Tokico Struts, dust boots, top hats, camber bolts all new last year. $500

- Stock 15's 5 star mx-3 wheels, Hancook K102 tires 80% tread left. Rims are made by enkei, and are super light $300

- Stock Black Mx-3 hood $100

- Stock headlights, the set, pretty clear $30

- Pacesetter adjustable short shifter, SRD shifter bushings. $70

- CZT 67mm throttle body (KL36), beefed up throttle linkage spring, seealed throttle plate. $200

- Curved kneck ported KLZE intake manifold. Semi polished, knife edged inlets, Comes with all VRIS, red painted fuel rails, ZE injectors. 200

- Mike Seli reground intake cams. Grind: 0.353" lfit, 209deg @ 0.050" KLDE exhaust cams (better for nos/boost) $300

-Race Ported and polished KLZE heads. 3 angle valve job, resurfaced faces. only 6000km's $300

- 94 Mx-3 Disty, modified cap for external coil. Internal coil worked perfectly and is still in tact. Cap and rotor are almost new.

- Interprep valve springs /de retainers $150

- Megasquirt V2 with extras. Comes already wired into an mx-3 harness. Ready to plug in and go with a N/A KLZE tune, on my motor it was around 190-200whp, trapping 98-99mph $400

- MSD blaster 2 coil, Mallory Highfire 6AL Digital ignition box, coil bracket, MSD 8910 tach adaptor: $300

- MDX udp, silver. Fixed timing ring problem $40

-Toga HV oil pump, 6000km's $50

- KLZE phenos $50

-Mx-3 GS front bumper/lip, small crack on lip, black in colour $200

- NEW last year brake calipers all around, painted red, perfect condition only 6000km's. Slotted rotors new last year all 4, pads are still decent $350

- Goodridge Stainless braided brake lines all 4 $50

- Clutchmaster Stage 3 clutch, Mx-3 flywheel, lots of life in the clutch, was holding estimated 260whp perfectly fine. Chirps 3rd all the time $150

- Mx-3 GS tranny, no grinds $200

- SRD Billet aluminum crossmember (mx-3), scratched up from being dumped. Still stiff as hell, big upgrade over stock $100

- Rockford Fostage components (mids, tweaters, and crossovers) custom mounted in black mx-3 door skins (pw, pl) perfect condition. Song 222W amp and RCA's $150

- Brand new this year mx-3 Gas tank, maybe 1500km's on it. $100

Tons of parts im sure im forgetting. Complete mx-3 GS willing to part out. Lots of new parts. Heck i think the only thing not changed on this thing in the past 2-3 years is the control arm bushings. Endlinks, balljoints, trailing arms ect have all been changed recently.

Take the entire car as it sits for $5000 (minus the nitrous)

All parts are OBO, some i'd rather keep local. But willing to ship everything at the buyers expense.

Tyler17rose · Post by **Tyler17rose** » September 16th, 2006, 2:56 pm

some pics of the build last winter. And pics of the headlights/car:

Tyler17rose · Post by **Tyler17rose** » September 16th, 2006, 2:58 pm

Tyler17rose · Post by **Tyler17rose** » September 16th, 2006, 3:01 pm

Once i get my digi camera back from a friend i can take a pic of anything you guys request.

+++ note heads were resurfaced and valves were ground after above mid porting photos. +++++++

mitmaks · Post by **mitmaks** » September 16th, 2006, 4:23 pm

pm sent

Matt · Post by **Matt** » September 16th, 2006, 6:05 pm

Interseted in....

- NEW last year brake calipers all around, painted red, perfect condition only 6000km's. Slotted rotors new last year all 4, pads are still decent $350

- Momo steering wheel hub for mx-3 $45

$375 for all??

Will pickup.

timpronk · Post by **timpronk** » September 16th, 2006, 7:34 pm

Out of curiousity, do you know what it ran all motor?

Tyler17rose · Post by **Tyler17rose** » September 16th, 2006, 7:39 pm

timpronk wrote:Out of curiousity, do you know what it ran all motor?

Never actually got it to the track after the megasquirt install and tune, but im sure i was running low low 14's because i was taking stock SRT-4's on the highway and from a dig, stage 2 SRT-4 was kneck andkneck, took down G35's like nothing.

Id say 14.3 ish.

Dali · Post by **Dali** » September 16th, 2006, 9:11 pm

email me at unclesluggo@shaw.ca i want the brake lines and toga pump. thanks.

hgallegos915 · Post by **hgallegos915** » September 16th, 2006, 9:21 pm

YOU sir will be my hero if you sell me the top transmission mount!!!! PLEASE

mx3autozam · Post by **mx3autozam** » September 17th, 2006, 2:25 am

Can you get me pictures of the Exhaust system?

John

Steeb · Post by **Steeb** » September 17th, 2006, 4:43 am

pm'd ya

after all the work people put into their car, it makes me sad when they part out for something like this. any car that is not just mx3's

2RotorsNaDream · Post by **2RotorsNaDream** » September 17th, 2006, 9:47 am

PM sent

Devlin · Post by **Devlin** » September 17th, 2006, 11:56 am

I'll take the tranny itself
PM sent

i know shipping would be hell, is it possible to meet up someplace halfway?

LooseChangeRacing · September 17th, 2006, 11:57 am

Throttle Body is mine