Hey I finally finished my ZE swap and fired it up. The problem I'm having is that it idles at 3500 rpm.
I've done a search on the forums and only come up with low or bouncing idle issues not extremely high idle issues. Does anyone know a fix for this?
I'd really love to get this fixed asap and try out the new power.
Thanks.
Edit: I currently have the EGR vacuum tubes disconnected and I'm hoping this isnt what causes the high idle.
Help with Idle Issues
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
- johnnyb
- Supporting Member
- Posts: 1079
- Joined: January 26th, 2003, 2:01 am
- Location: Brampton, On, Canada
fixed the problem. Found a leak that I didnt notice before. Now I just need to fix the throttle. They hit it with something and bent everything so it sticks and doesnt close all the way I figure thats an easy enough fix. And I need to fix my grounding. The car shuts off mid driving and theres no power whatsoever.
But all in all what a difference in power.
But all in all what a difference in power.
![Image](http://i49.photobucket.com/albums/f292/amun931/mx3.jpg)
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Ya, the throttle cams on the TB can get bent if the importer is not carefull enough since they do stick out above everything else. I've seen a few that were slightly bent at an importers too. After those get true'd up, it will probably be necessary to adjust those throttle cam set screw stop positions as part of the TPS adjust procedure.johnnyb wrote:fixed the problem. Found a leak that I didnt notice before. Now I just need to fix the throttle. They hit it with something and bent everything so it sticks and doesnt close all the way I figure thats an easy enough fix. And I need to fix my grounding. The car shuts off mid driving and theres no power whatsoever.
But all in all what a difference in power.
Car shutting off mid driving??? Was the cam belts changed as part of the ZE intstall ( a very highly recommended procedure BTW)? If so, than perhaps the belt is off by a tooth or so and might be the source of the shutting off. Was the K8 coolant filler neck with the extra coolant thermosensor migrated from your old K8 to the ZE when the belt install was done (again, a strongly recommended procedure to follow)?
John
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas