upgrades in cali
upgrades in cali
Since i live in cali and the option for a bp or a bpt is not availabe since it wont pass smog what kind of upgrades should i look for my rs dohc, ima get a valve job and new rings, head gasket, i already have a whole new ground kit, battery, intake, plugs, wires. what kinda power is out there that i can put into my car without worrying about smog issues?
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE
did you check if 95-98 protege engines would fit - they would be obd2 and would pass emissions test i think.
94 Mx-3 Precidia
1.8L 4Cyl DOHC newGen BP (used to be B6DE) ATX
http://www.mx-3.com/phpbb2/viewtopic.php?t=54032
http://www.cardomain.com/id/ariesdude
1.8L 4Cyl DOHC newGen BP (used to be B6DE) ATX
http://www.mx-3.com/phpbb2/viewtopic.php?t=54032
http://www.cardomain.com/id/ariesdude
- 2fazed
- Supporting Member
- Posts: 1885
- Joined: May 21st, 2002, 2:01 am
- Location: La Selva Beach, California
- Contact:
ariesdude wrote:did you check if 95-98 protege engines would fit - they would be obd2 and would pass emissions test i think.
That wouldn't be any better, since he would come across the same problem. He wouldn't be able to pass a legal smog. Any engine he puts in, if the smog points on the engine doesn't match the smog sticker inside the hood, it will be considered illegal. Now, he can go to the Referee and get a BP/BPT engine legalize. That could cost little or alot. I just did that with my DE. Or he can buy my GSDE, and make it easier.
16 Hyundai Elantra Value Edition
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
-
- Regular Member
- Posts: 67
- Joined: December 29th, 2005, 2:29 am
- Location: chino hills ca
- Contact:
hey bumpsybro im in cali to and i have the same problem. i also have a 94 dohc. there are a few things u can do that i have read to get more power out of it like port and polish the head, port match the mani to the head,bigger tb, bp injectors, cat back exhaust but i have a header back system, high flow cat, custom headers. miata forged pistons balenced crank, miata cams, there is some stuff u can do but no as much as the bp. and u can also do the 5 speed swap i u dont have one. im sending my head in to be ported and polished and port matched to the mani and porting and polishin the mani.
-
- Regular Member
- Posts: 67
- Joined: December 29th, 2005, 2:29 am
- Location: chino hills ca
- Contact: