walbro 255 lph hp fule pump info

claude matte · Post by **claude matte** » March 12th, 2006, 9:45 pm

hi guys im kind of stuck what fuel pump should i get i was thinking walbro 255 lph hp fule pump is this only a in line pump and ndo i remove the stock pump or run both thank you for answering my dumb q
later

Slammed6 · Post by **Slammed6** » March 13th, 2006, 2:15 am

Well you have an option to run an inline fuel pump, or a intank fuel pump.

I have a walbro 255 HP in my MX-3 right now, and it was an intank fuel pump that replaces your stock one. Well worth the money, you can find them relatively cheap on ebay.

Post by **Custommx3** » March 13th, 2006, 9:43 am

Unless your pushing out mad HP, or need that extra fuel. Even with a KLZE with mods the 255 is way overkill. I myself had one, and the stock FPR couldnt take the pressurte and killed my mileage and ran very rich. I ended up buying an AFPR just to fix issues I had with the walbro 255.

JWMX3 · Post by **JWMX3** » March 13th, 2006, 10:04 am

with a modded car and 50-75 shot of juice you only need a 190

claude matte · Post by **claude matte** » March 13th, 2006, 11:59 am

thanks guys all i seem to find was the in line ver ,i thought i was on a witch hunt thanks
as far as a need i aim in tne process of turboing the car and am useing the megasqurit to control the fule dose anyone know where i can get my hands on some 550 nissan injectors ..
or is there a plug and play 550 that will fit our fule rail thanks again

slimmyslim1420 · Post by **slimmyslim1420** » March 14th, 2006, 8:14 pm

You should be able to get the injectors at a junkyard. I recently bought a set in the rails with the connectors from a company on ebay that sells, fuel rails and etc. I only paid a little over $100 shipped for the whole thing, so it wasn't that bad. If you want to use them let me know and i'll get you their e-mail.

claude matte · Post by **claude matte** » March 15th, 2006, 11:41 am

yes please im going mad trying to find a set it like 410 for a new set thanks

slimmyslim1420 · Post by **slimmyslim1420** » March 16th, 2006, 12:45 am

Here is their e-mail ebay@everyautoneed.com . Just write them and ask for some injectors/rails or whatever you need from one of the cars on the list babyblue put on the write up. They should be able to help.

babyblueMX3 · Post by **babyblueMX3** » March 16th, 2006, 11:08 am

pretty much all nissan injectors (side feed) once modded will give 550cc. though they might have slight variation between the 6 injectors if you don't get them from the same car.

claude matte · Post by **claude matte** » March 16th, 2006, 1:11 pm

thanks guys ill give them a try

claude matte · Post by **claude matte** » March 16th, 2006, 1:54 pm

injectors out of a Nissan Frontier/Exterra 3.3 V6 Fuel Rail With InJectors
i found but no engine code so i dont know if there right

slimmyslim1420 · Post by **slimmyslim1420** » March 16th, 2006, 10:21 pm

Where did you find those. All you have to do is e-mail them with exactly what you need and they will let you know if they have it. I got mine from a doch 3.0 Maxima. you can use like 92-95 and 95-98 or something like that.

claude matte · Post by **claude matte** » March 17th, 2006, 12:49 am

thank you slimmyslim1420
i did just that but i found the other ones on ebay before they got back to me . but all is good he has a set and there on there way so big thanks for the link and the help all is good got the intank and the injectors comming

JWMotorsports · Post by **JWMotorsports** » March 17th, 2006, 1:34 pm

Thought you might like to see the specs both the 255lph and 255lph High Pressure pums.

http://www.vfaq.com/mods/Walbro-specs.html

Typically a 255 HP can support around 500HP

claude matte · Post by **claude matte** » March 17th, 2006, 3:21 pm

nice chart thats what inline preformance said in his emails
but its nice to hear it from somone else thanks