1st time noob questions

lakersfan1 · Post by **lakersfan1** » January 24th, 2006, 10:08 pm

protegetuner wrote:will the millinium intake mani and heads fit on that.

No you're not going to put Millenia heads on a KF or K8. The bore is smaller so it won't accomodate the full width of the combustion chamber and valves. It'll bolt up, but it won't work.

Don't waste your time on anything but a KL. If you want get a KLDE over a KLZE, fine. But don't waste your time on anything else. There's no replacement for displacement.

Aston Wards · Post by **Aston Wards** » January 25th, 2006, 1:12 am

Your KL may not need a millenia manifold anyway, MX3 owners only use that manifold cos the straight neck won't fit

Definately go for a stand-alone ecu