Dash removal help
- Ferrarislayer
- Junior Member
- Posts: 23
- Joined: December 10th, 2005, 5:26 am
- Location: Vancouver, BC
Dash removal help
At the risk of souding completely inept(sp?) I'm having trouble removing the cover around the gauge console, I've removed all the screws from above the display, removed the 2 screws on the piece under the steering wheel in the foot-well, took the pin release off and still no luck. What am I missing. btw it's the '93 dash not the newer style.
- Ferrarislayer
- Junior Member
- Posts: 23
- Joined: December 10th, 2005, 5:26 am
- Location: Vancouver, BC
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
What Grants??
You dont have to do all that, man! (at least not on the North American cars....)
You do have to remove all the screws you have already taken out... then take the surround off from around the steering wheel. I think there are 3 screws that hold it together from the underside.
Take that off and the surround should caome off or give some more clues about how to take it off... LOL
You dont have to do all that, man! (at least not on the North American cars....)
You do have to remove all the screws you have already taken out... then take the surround off from around the steering wheel. I think there are 3 screws that hold it together from the underside.
Take that off and the surround should caome off or give some more clues about how to take it off... LOL
- Ferrarislayer
- Junior Member
- Posts: 23
- Joined: December 10th, 2005, 5:26 am
- Location: Vancouver, BC