tb swap from auto to manual

gapimpin · Post by **gapimpin** » November 28th, 2005, 11:50 am

according to the faq you can put a throttle body from an automatic into a car with a manual but you have to change the tps sensor... what is involved in changing a tps sensor from a 4pin automatic to a 3pin manual tps sensor?

fir3 · Post by **fir3** » November 28th, 2005, 12:19 pm

My car is manual and the tps has 4pins

atlantamx3 · Post by **atlantamx3** » November 28th, 2005, 12:31 pm

Pull the old TPS out and put the new TPS in.

Its really that simple.

gapimpin · Post by **gapimpin** » November 28th, 2005, 2:30 pm

thanx

Franko · Post by **Franko** » November 29th, 2005, 9:22 am

A four wire from what? A mx3? I remember having issues with the 3 to 4 wire changeover and the first thing you notice when you take off the sensor of the 3 wire is that there is this little rod sticking out of the throttle body where the tps was and the 4 wire works very differently. Now the 4 wire tps I had was from a protege and I was comparing it to the mx3's but It may be the same problem.