tb swap from auto to manual
- gapimpin
- Regular Member
- Posts: 77
- Joined: February 6th, 2005, 2:22 pm
- Location: hewitt texas
- Contact:
tb swap from auto to manual
according to the faq you can put a throttle body from an automatic into a car with a manual but you have to change the tps sensor... what is involved in changing a tps sensor from a 4pin automatic to a 3pin manual tps sensor?
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
A four wire from what? A mx3? I remember having issues with the 3 to 4 wire changeover and the first thing you notice when you take off the sensor of the 3 wire is that there is this little rod sticking out of the throttle body where the tps was and the 4 wire works very differently. Now the 4 wire tps I had was from a protege and I was comparing it to the mx3's but It may be the same problem.
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.