Well here is some pictures of my prototype intercooler setup
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Well here is some pictures of my prototype intercooler setup
I wanted a one sided intercooler...but my friend just got a normal one in and i was usring it to measure my pipe set up today.(if i cant find a onesided small intercooler) So here is sumthing similar to what it wil look like when i run it. I dont have any 2.5 inch couplers yet so i just kinda stuck it in place how it mightn look like. and im mising the u bend for the outlet...but u can see how it might look.
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Oh yes, nothing but quality!! : P
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
-
- Regular Member
- Posts: 675
- Joined: September 15th, 2004, 2:01 am
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Almost same place as urs. The outlet of the turbo goes straight down and through a hole i cut in the wall. then the outlet of the intercooler comes back and goes through a diff hole (the holes are near each otther) Oh the turbo was no inthe car at that time.
27 inches long...6.5 high....3.5 thick.
27 inches long...6.5 high....3.5 thick.
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
- BuGS
- Regular Member
- Posts: 1521
- Joined: May 5th, 2004, 2:01 am
- Location: East Wenatchee, WA, USA
- Contact:
hmm honestly, If I had a V6 I wouldn't even mess with an intercooler. I would have a 50/50 Water/Alcohol injection setup with a small IC piping run. Way cheaper then having to do all the IC piping, and a Water injection setup costs as much as an IC. Like $250. And Then you have less lag, a cleaner engine, no carbon buildup, and an awesome sleeper.... he he he
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
or you use bothBuGS wrote:hmm honestly, If I had a V6 I wouldn't even mess with an intercooler. I would have a 50/50 Water/Alcohol injection setup with a small IC piping run. Way cheaper then having to do all the IC piping, and a Water injection setup costs as much as an IC. Like $250. And Then you have less lag, a cleaner engine, no carbon buildup, and an awesome sleeper.... he he he
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Haha yes, thats the way to think babyblue, lol.
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
- mrspanky79
- Regular Member
- Posts: 575
- Joined: October 2nd, 2001, 2:01 am
- Location: Keswick , Ontario, Canada
- Contact:
mrspanky79 wrote:hmm what about your rebar
IMO, in terms of personal safety, the re-bar doesn't do much. It;s plastic and only intended for low speed (5MPH) impacts if im not mistaken. Although any little fender bender can be costly without it.
I lost my rear re-bar with the installation of the Erebuni #358 rear bumper which has a slimmer profile. So far so good.... (fingers X).
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
Yea i can loose the bar if i want (with my old KIT i had no bar for like a year) but i did some measurements today, and if i make th epipes a tad bit lower (mostly the top one) then i can keep the rebar.
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
- mrspanky79
- Regular Member
- Posts: 575
- Joined: October 2nd, 2001, 2:01 am
- Location: Keswick , Ontario, Canada
- Contact:
well here is some resons to have one, the smallest crash would smash up all the turbo work and probley the engine. Insurance would not cover you and last the main reason i make a new one that was smaller and stronger for mine was to help keep the front and solid/less flex and give.
War does not determine who is right, war determine who is left!
94 mx3 GSX Stroked Turbo'd and Intercooled
99 vitara 4x4
94 mx3 GSX Stroked Turbo'd and Intercooled
99 vitara 4x4