Cold air intake possible?
-
- Regular Member
- Posts: 457
- Joined: March 13th, 2005, 11:58 pm
- Location: niagara falls, ontario, canada
-
- Junior Member
- Posts: 18
- Joined: September 8th, 2005, 4:01 am
- Contact:
-
- Regular Member
- Posts: 141
- Joined: August 22nd, 2004, 2:01 am
- Location: Dallas, TX
- Contact:
Yes, the EBay Cold air intake which is made for the SOHC version of our cars WILL work. I did it myself and only takes about an hour or two (depending on how unorganized with your tools you are.. like me! )
Also I did fine only using the stuff that came in the box (adapters and what not), but after while i did notice a piece of adapter starting to come off my MAF (Mass Air Flow Sensor) and bought a new one from AutoZone (2.5" to 3") and used that instead. ever since then it's worked perfectly and sounds friggin awesome...
At home, there's a long stretch of road, if i floor it and get the engine pumping hard around 3500 RPM it sounds like a beast.. always turns heads
If you need pictures.. ill be glad to supply some.
-Chris
Also I did fine only using the stuff that came in the box (adapters and what not), but after while i did notice a piece of adapter starting to come off my MAF (Mass Air Flow Sensor) and bought a new one from AutoZone (2.5" to 3") and used that instead. ever since then it's worked perfectly and sounds friggin awesome...
At home, there's a long stretch of road, if i floor it and get the engine pumping hard around 3500 RPM it sounds like a beast.. always turns heads
If you need pictures.. ill be glad to supply some.
-Chris
-
- Regular Member
- Posts: 184
- Joined: September 19th, 2005, 8:00 pm
- Location: Philomath, Oregon (Hickville, USA)
- Contact: