Lots of white smoke! HELP!!!
Lots of white smoke! HELP!!!
The car was blowing tuns of white smoke.. so i figured it was the head gasket.
So i took off the head:
I took it in to a machine shop and asked to get it remachined/pressure tested. he looked at it and was like oh that the prob right there (lil tiny nick on edge of a hole)
so he remachined it
I put on new exhaust/intake/head gaskets
and put it all back togeater.
the car was all good no smoke nothing for the few hours i drove it after putting it back togeather.
since then it has been sitting in the driveway for about 3-4 weeks
now i started it up and it was showering out the smoke again>
so i tryed Gunk > heavy duty engine tight..
Still smoked.. Then i itryed irontight (coolent aditive)
Both of which are suposto fix small cracks in the head.
now.. Still smoking
PIC OF CAR NOW (TODAY)
i dont know what else to try.. should i just buy a new head????
any sugestions?[/img]
So i took off the head:
I took it in to a machine shop and asked to get it remachined/pressure tested. he looked at it and was like oh that the prob right there (lil tiny nick on edge of a hole)
so he remachined it
I put on new exhaust/intake/head gaskets
and put it all back togeater.
the car was all good no smoke nothing for the few hours i drove it after putting it back togeather.
since then it has been sitting in the driveway for about 3-4 weeks
now i started it up and it was showering out the smoke again>
so i tryed Gunk > heavy duty engine tight..
Still smoked.. Then i itryed irontight (coolent aditive)
Both of which are suposto fix small cracks in the head.
now.. Still smoking
PIC OF CAR NOW (TODAY)
i dont know what else to try.. should i just buy a new head????
any sugestions?[/img]
- BuGS
- Regular Member
- Posts: 1521
- Joined: May 5th, 2004, 2:01 am
- Location: East Wenatchee, WA, USA
- Contact:
Re: Lots of white smoke! HELP!!!
Yes, machine fixes don't often work on heads. Esspeciually aluminum headssicon99 wrote:
i dont know what else to try.. should i just buy a new head????
- Shades
- Regular Member
- Posts: 944
- Joined: February 7th, 2002, 2:01 am
- Location: Vancouver, BC, Canada
- Contact:
Maybe you didn't torque the head down properly and you have a coolant leak into one of your chambers?
Do a compression test.
Do a compression test.
JoN - Ex-Automotive Machinist Journeyman/Refrigeration Mechanic Apprentice
1996 Mazda MX-3 RS - Creek Blue Mica
RACING BP fully built with Twin Scroll GT3071R TURBO @ +30psi - Specs and Pictures
"Do it ONCE, do it RIGHT!"
-
- Regular Member
- Posts: 568
- Joined: February 25th, 2004, 2:01 am
- Location: pa
i did at least 10 mx3 heads some were cracked some warped and some just needed a gasket.......but one cracked one did what yours did and it was the piston rings in the cyl that had the crack,i got the car from a guy who said he left it ideling for about 15 minets to find car overheating.do both wet and dry comp test and if there is an increase in comp,,,if there is then its swap time...good luc,if ya need a head i mite have one.
how much would you want for a head?
email me sicon99@Hotmail.com
i was thiking i might buy a reman one form lordco if all else fails.;
email me sicon99@Hotmail.com
i was thiking i might buy a reman one form lordco if all else fails.;
- ryanlindenberg
- Regular Member
- Posts: 874
- Joined: February 24th, 2003, 2:01 am
- Location: Minnesota
does it only do it when you start it up? could be valve seals...but it seems like it would be blue smoke.
CARDOMAIN WITH UPDATED PICS
"There are 2 kinds of pedestrians, the quick and the dead."
"There are 2 kinds of pedestrians, the quick and the dead."
I'm having the same issue. When my car has been sitting for a while like 4-5hours it smokes the same smoke like crazy but once it heats up the smokes stops. I was told before that it was the valve seals and that once the car heats up it will burn the oil quicker and wont allow any smoke i'm getting this taken care of this week.