FINISHED widebody pic on my bros cavalier
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
FINISHED widebody pic on my bros cavalier
This is the kit that was intended for the mx3 but I had been extremelly busy making a set of projector lights/ engine swap/ work/ work / work and girlfriend. Here is the finish product..if anyone would be interested well let me know. We are making yet anoither copy..this one here is a copy..the original we used them as molds and made them into a tick cast. Note that it would not come with ze inserts ..those were gotten of a washer dryer combo..lol the rear vents were aquired via ebay.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- Hoodzy
- Regular Member
- Posts: 1526
- Joined: February 19th, 2005, 4:15 pm
- Location: Calgary, Alberta
- Contact:
it does to me mainly because of the colour though
http://www.cardomain.com/id/hoodzy13" onclick="window.open(this.href);return false;
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
I can take tons of more pics if you want. My cell phone camera doesnt loike the sun much... 1.5 megapizle my arse :/
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
is it just me or the pics stopped working..
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
I like, Im interested in one for mx3
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
a POS throw away car made by GMFranko wrote:Whats a cavalier?
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
So this "cavalier" isnt made by mazda? Are you sure?
I also remember hearing something about "multiport fuel injection" and a possible displacement of "3.1", and being informed that if challenged it can "lay a strip" from a red light.
I also remember hearing something about "multiport fuel injection" and a possible displacement of "3.1", and being informed that if challenged it can "lay a strip" from a red light.
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
- bmwm3guy
- Regular Member
- Posts: 1066
- Joined: March 7th, 2004, 2:01 am
- Location: Gatineau, QC
- Contact:
are you serious that there are no Cavi's up in Newfoundland? wowFranko wrote:So this "cavalier" isnt made by mazda? Are you sure?
I also remember hearing something about "multiport fuel injection" and a possible displacement of "3.1", and being informed that if challenged it can "lay a strip" from a red light.
These things as utter POS's and run mid 16s at best. They used to be either 2.2L or 2.4L 4 bangers, dunno what these new ones are. Still slow... my stock GS took their doors. The ZE blows them off the road.
- relisys_3200
- Regular Member
- Posts: 875
- Joined: November 11th, 2004, 2:01 am
- Location: London / Ontario / Canada
- Contact:
Franko wrote:So this "cavalier" isnt made by mazda? Are you sure?
I also remember hearing something about "multiport fuel injection" and a possible displacement of "3.1", and being informed that if challenged it can "lay a strip" from a red light.
bahahah.....franko your funny..."what is a cavalier" lol
Brandon
1992 MX-3 GS-ZE
1992 MX-3 GS-ZE