Hi, Well i've tracked down another KL-ZE in the UK.
Just wanted to check its authenticity.
The head codes are
LEFT HAND BANK- KL 31-1A1 RIGHT HAND BANK KL 31-101.
Does this sound right? Might be able to get the LSD aswell.
Found A KL-ZE, I think
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Head codes do not differentiate a KLZE from a KLDE as it could be a KLDE from a Millenia as well as a KLZE with that head code. The ONLY way to tell a KLDE from a KLZE is to shine a light down the spark plug holes. The KLZE has flat topped pistons with only valve reliefs. The KLDE piston dishes down some before it gets to the valve reliefs.
Is it coming from a breaker or an engine importer? If its a breaker he should be able to tell you most of the details below. if its a engine importer they probably won't know to many specifics about source car but should be able to tell you the number stamped on the throttle body
Ask them
What car it came out of ? Mx-6 or Xedos 9(Millenia) ?
What number was stamped on top the throttle body ? Should be KL31(But there other alternatives that I'm not sure of, others on the forum will know them)
What ECU was in the car ? Should be KL31 or KL36
What VAF was fitted in the car ? Should be JE50
Dunno about the LSD
Get as many details from them as possible then post them up here & I'm pretty sure the guys on here should be able to tell what engine it is
Hope that helps
Ask them
What car it came out of ? Mx-6 or Xedos 9(Millenia) ?
What number was stamped on top the throttle body ? Should be KL31(But there other alternatives that I'm not sure of, others on the forum will know them)
What ECU was in the car ? Should be KL31 or KL36
What VAF was fitted in the car ? Should be JE50
Dunno about the LSD
Get as many details from them as possible then post them up here & I'm pretty sure the guys on here should be able to tell what engine it is
Hope that helps
1994 MX-3 ZE
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
how much??
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!