Where can I get a Mazdaspeed style spoiler in the UK?
- DamoV6UK
- Regular Member
- Posts: 32
- Joined: February 29th, 2004, 2:01 am
- Location: The little known village of Mortimer near Reading in sunshine drenched England
Where can I get a Mazdaspeed style spoiler in the UK?
Looking for a Mazdaspeed style spoiler for my MX as am not going to put a kit on car but am doing subtle mods and think it would look pretty sweet.
Saw one on a silver mx3 in Liverpool last week so its gotta be possible, it really suited the car.
I am no way paying £400 freight after buying one from america for under £100!!
Damo
Saw one on a silver mx3 in Liverpool last week so its gotta be possible, it really suited the car.
I am no way paying £400 freight after buying one from america for under £100!!
Damo
MX3 V6 - Modified to include lots of bits such as a Poppy Coral air freshener...
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
you had any luck finding a supplier, also interested in the same spoiler, I do a bit of fishing and see if i can find one, and keep you posted !!
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- DamoV6UK
- Regular Member
- Posts: 32
- Joined: February 29th, 2004, 2:01 am
- Location: The little known village of Mortimer near Reading in sunshine drenched England
I found it on the pakfeifer austria website for about £280 when you convert from euros, but thats plus shipping which starts to become silly money again!!
Damo
Damo
MX3 V6 - Modified to include lots of bits such as a Poppy Coral air freshener...
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
becoming hard to find a uk supplier, http://www.corksport.com do two versions of the MS spoiler there own copy or a genuine one but again its the p&p that ruins it! if your after pakfiefer products the uk supplier for that is http://www.evoperformance.co.uk but i dont like the pakfiefer style.
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- DamoV6UK
- Regular Member
- Posts: 32
- Joined: February 29th, 2004, 2:01 am
- Location: The little known village of Mortimer near Reading in sunshine drenched England
No I dont like the pakfeifer on on evoperformance either but look on the pakfeifer site, they do a rounded one as well, like the mazdaspeed spoiler,
See what i mean?
See what i mean?
MX3 V6 - Modified to include lots of bits such as a Poppy Coral air freshener...
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
yeah thats the one, I try and email pakfifier to see if they have a uk supplier for that spoiler. I keep you posted, thats the one I want, glad you said it looks good on silver as mines silver, think you might have to take the standerd boot spoiler off in order for it to fit, but not 100% certain.
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- DamoV6UK
- Regular Member
- Posts: 32
- Joined: February 29th, 2004, 2:01 am
- Location: The little known village of Mortimer near Reading in sunshine drenched England
By translating the pakfeifer website through google, I understand you buy the spoiler then you buy an auxilury spoiler that covers the gap where you remove the standard spoiler.
Ive taken my standard one off in the past and there are holes etc straight into car so you would definitely need this to cover where the old one used to be.
When I said £280ish, thats...
044TAMX306 Tail wing round execution (black) 371,94
...and...
044TAMX30Ë Auxiliary spoiler (the small one) necessarily if one one orig. Tail wing has, there the large one otherwise does not fit!! 60,00
So there are part numbers and prices in euros, plus badly google translated german description!
If you plan on emailing them, then this should be a help
Damo
Ive taken my standard one off in the past and there are holes etc straight into car so you would definitely need this to cover where the old one used to be.
When I said £280ish, thats...
044TAMX306 Tail wing round execution (black) 371,94
...and...
044TAMX30Ë Auxiliary spoiler (the small one) necessarily if one one orig. Tail wing has, there the large one otherwise does not fit!! 60,00
So there are part numbers and prices in euros, plus badly google translated german description!
If you plan on emailing them, then this should be a help
Damo
MX3 V6 - Modified to include lots of bits such as a Poppy Coral air freshener...
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
Whats the link for the pakfifier site your looking at? I know the U.S one.
Cheers
Cheers
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
duh just seen that the website is on that picture !!
Ive made a few emails hopefully might get somewhere
Ive made a few emails hopefully might get somewhere
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- DamoV6UK
- Regular Member
- Posts: 32
- Joined: February 29th, 2004, 2:01 am
- Location: The little known village of Mortimer near Reading in sunshine drenched England
hopefully they can do shipping at a reasonable price, £280 is plenty to pay as it is!
Also hope they speak english as my german hasnt been used since school!
Also hope they speak english as my german hasnt been used since school!
MX3 V6 - Modified to include lots of bits such as a Poppy Coral air freshener...
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
- MaX-3
- Regular Member
- Posts: 96
- Joined: July 17th, 2003, 2:01 am
- Location: Frankfurt, Germany
- Contact:
i got the round version of the pak spoiler too.
i think the easiest way will be to ask somebody who´s driving a rs, if he is willing to change your gs spoiler against his rs cover, it will be the cheap way
the original mazda part is way to expensive, it will cost about the same as the pak spoiler here in germany, but don´t realy know if mazda parts are this expensive in the uk
i´am a big fan of that wing, because you don´t need the diffusor to get a tight a-- on your mx
http://www.mx-3-community.de/jgs_galeri ... e=jpg&sid=
i think the easiest way will be to ask somebody who´s driving a rs, if he is willing to change your gs spoiler against his rs cover, it will be the cheap way
the original mazda part is way to expensive, it will cost about the same as the pak spoiler here in germany, but don´t realy know if mazda parts are this expensive in the uk
i´am a big fan of that wing, because you don´t need the diffusor to get a tight a-- on your mx
http://www.mx-3-community.de/jgs_galeri ... e=jpg&sid=
Greetz MaX-3
visit the german http://www.mx-3-community.de
and yes, my stickers improve performence!
visit the german http://www.mx-3-community.de
and yes, my stickers improve performence!
- DamoV6UK
- Regular Member
- Posts: 32
- Joined: February 29th, 2004, 2:01 am
- Location: The little known village of Mortimer near Reading in sunshine drenched England
does anyone have the part number for the RS garnish from mazda?
It could be difficult to get hold of in the UK, as far as im aware, all MX-3s came with what the americans call the GS spoiler whether 4cyl or V6.
It could be difficult to get hold of in the UK, as far as im aware, all MX-3s came with what the americans call the GS spoiler whether 4cyl or V6.
MX3 V6 - Modified to include lots of bits such as a Poppy Coral air freshener...
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
If you see a red MX shattering the tranquility of the Berkshire countryside... Give us a wave!!
- neutral
- Supporting Member
- Posts: 1770
- Joined: December 27th, 2004, 10:19 am
- Location: U.S. Mid Atlantic
According to the Mazda Electronic Parts Catalogue (Europe Version) the exact part name is "Garnish, Lift Gate" (there's lots of other irrelevant little bits in the MEPC called "garnish" too) and part # is EA01-50-810B. Might be worth lurking on ebay as these items come up regularly for low cost or post a WTB on the BB. Mazda will want your left nut and beaucoup $$ for a new one from them.
-Jim
- MaX-3
- Regular Member
- Posts: 96
- Joined: July 17th, 2003, 2:01 am
- Location: Frankfurt, Germany
- Contact:
here in germany, all rs where deliverd with that little garnish!
you had the option to equip your rs with the gs spoiler, that all the others have, but only a very rare amount of rs where equiped with it from factory on.
the one you can see on my mx is my original rs garnish, the pakfeifer one has a little spoiler on it just like the gs one but it is in the shape of the rs garnish, if you understand what i mean..
you had the option to equip your rs with the gs spoiler, that all the others have, but only a very rare amount of rs where equiped with it from factory on.
the one you can see on my mx is my original rs garnish, the pakfeifer one has a little spoiler on it just like the gs one but it is in the shape of the rs garnish, if you understand what i mean..
Greetz MaX-3
visit the german http://www.mx-3-community.de
and yes, my stickers improve performence!
visit the german http://www.mx-3-community.de
and yes, my stickers improve performence!