V6 Probe Throttle body?
-
- Regular Member
- Posts: 583
- Joined: September 16th, 2002, 2:01 am
- Location: Hartford, CT
V6 Probe Throttle body?
I'm wondering if a throttle body from a V6 Probe would fit a stock GS?
Sold my 95 RS "Little Peanut" but she will never be forgotten.
Re: V6 Probe Throttle body?
Yup, should.
93 GS, KLZE, KL31 ECU, Centerforce Stg 3 Clutch, 2.25" Exhaust w/Flowmaster muffler, OBX Headers, Pheno Spacers, Front & rear X-drilled/slotted Rotors, KVR pads, SS brake & clutch lines, Ractive Filter, H&R Springs, Tokico Blue Struts, 8mm Accel Wires, MSD 6A w/ Blaster 2 Coil, HVAC Indiglo Panel. *Sold*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: V6 Probe Throttle body?
It will, but only if you also switch to a straight neck manifold. It won't work on a MX3 or Millenia manifold because the IAC on the bottom of the throttle body will hit a coolant fitting.
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: V6 Probe Throttle body?
If you use a Probe or MX6 manifold with a Probe or MX6 throttle body, it should clear fine. If you stick a Millenia or MX3 throttle body on the Probe or MX6 intake manifold, then it'd hit again. I've tried both odd combinations, and neither worked. It has to be the right TB for the IM.Originally posted by XxAntwawnxX:
i got the the who probe mani onmy ze. it does hit the coolant hose...but u can fix that easy.
- Zoso124
- Forum Moderator
- Posts: 1100
- Joined: November 7th, 2000, 2:01 am
- antispam: No
- Location: Sterling, VA
Re: V6 Probe Throttle body?
Mike Evans
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
what gains would one see to have a pgt im and tb?? if any?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!