Help 3/4 shocks leaking!

This forum is for Discussion on Suspension issues.
Post Reply
User avatar
garfy1981
Regular Member
Posts: 288
Joined: September 27th, 2004, 2:01 am
antispam: ~SPAM*SUX~
Location: UK, South-East
Contact:

Help 3/4 shocks leaking!

Post by garfy1981 »

Well 3 out of 4 shock absorbers are leaking. Need to find replacement but so far prices have been :crying: so far 100 GBP each! going to do all 4 anyhow, does anyone know of a cheaper brand or supplier many thanks! :crying: :crying:
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
nope-mx3
Regular Member
Posts: 1590
Joined: December 1st, 2002, 2:01 am
Location: Norway
Contact:

Re: Help 3/4 shocks leaking!

Post by nope-mx3 »

you should be able to get Koni`s for less than 100GBP a piece.

nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
User avatar
garfy1981
Regular Member
Posts: 288
Joined: September 27th, 2004, 2:01 am
antispam: ~SPAM*SUX~
Location: UK, South-East
Contact:

Re: Help 3/4 shocks leaking!

Post by garfy1981 »

got a quote for full set of Bilstein @ 305.00 GBP might sound like a stupid question but do the springs have to be released to replace the dampers if so is it worth replacing the springs for lowered versions? just a thought.
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
CrazieMX3
Regular Member
Posts: 32
Joined: October 5th, 2004, 2:01 am
Location: Sacramento

Re: Help 3/4 shocks leaking!

Post by CrazieMX3 »

You should be able to find aftermarket shocks cheaper than that.
-'97 Championshipwhite Civic Coupe (SOLD)
-'93 Red GS V6 CLEAN TITLE! (SOLD)
-'95 Silver Civic Hatchback (NEW BABE)
User avatar
garfy1981
Regular Member
Posts: 288
Joined: September 27th, 2004, 2:01 am
antispam: ~SPAM*SUX~
Location: UK, South-East
Contact:

Re: Help 3/4 shocks leaking!

Post by garfy1981 »

down to three quotes, does anyone rate the three different brands to help us decide;

set of Monroe shocks 270 GBP
set of Koni shocks 326 GBP
set of Bilstein shocks 305 GBP

:2thumbsup:
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Re: Help 3/4 shocks leaking!

Post by MazdaManiacMx3 »

You can get bilsteins ?
They are great I tried to get them and they said they weren't available for our cars ?
Whats the deal ? Does the Euro version have different mounts or something ?
Thanks
Kris
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
quicksliver
Regular Member
Posts: 779
Joined: July 3rd, 2003, 2:01 am
Location: Barrie, Ontario, Canada
Contact:

Re: Help 3/4 shocks leaking!

Post by quicksliver »

The mx-3 does not have 'Shocks' people! We have struts...big dif.
User avatar
garfy1981
Regular Member
Posts: 288
Joined: September 27th, 2004, 2:01 am
antispam: ~SPAM*SUX~
Location: UK, South-East
Contact:

Re: Help 3/4 shocks leaking!

Post by garfy1981 »

Will double check with the supplier to re-check his listings, whatever it is a strut or a shock it is leaking. Even in the dryest of weather the bottom part of the strut around the suspension ring theres a wet greasy dirt feel that never dies out unlike the dirt build up found behind the wheel arch for example.
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Re: Help 3/4 shocks leaking!

Post by MazdaManiacMx3 »

Can someone please get a part number on adjustable Bilsteins if they make them for our car .
Thanks
Kris
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
Post Reply

Return to “Suspension/Brakes/Wheels/Tires”