rs rear suspension question
rs rear suspension question
do you rs folks have a the same sized rear stabilizer bar as us gs's?
- Casino
- Regular Member
- Posts: 779
- Joined: April 20th, 2002, 2:01 am
- Location: Sudbury Ontario Canada / windsor
Re: rs rear suspension question
if you are talking about the lower tie bar we dont even have one.
or are u talking about something else ?
or are u talking about something else ?
- millionflame
- Regular Member
- Posts: 960
- Joined: March 4th, 2002, 2:01 am
- Location: Van Island, BC
- Contact:
Re: rs rear suspension question
Clarify what you mean please.
Sway bar, or tie rod bar?
Sway bar, or tie rod bar?
~ Millionflame (94 GS 120K)
Re: rs rear suspension question
stabilizer bar=sway bar. they are the same thing. strut tower bar is neither. some people get mixed up and call sway bars sway strut bars.
- jaydog5678
- Regular Member
- Posts: 1043
- Joined: March 27th, 2002, 2:01 am
- Location: Marietta, GA,
- Contact:
Re: rs rear suspension question
The RS uses a 19mm, front and back.
What does the rear bar measure on the GS??
The front GS is a 21mm, correct??
What does the rear bar measure on the GS??
The front GS is a 21mm, correct??
Re: rs rear suspension question
no clue. i wish i knew too. i think you may be right tho. does anyone know?
Re: rs rear suspension question
Strut tower bar is up top...The tie bar they refer to is down at axle level.
No?
No?
No Sig
Re: rs rear suspension question
Correct me if I'm wrong...
Tie rods up front...
Strut towers bars up top...
stabilizers out back on GS only...
There's a company that makes billet S-Bars for GS only!..
Tie rods up front...
Strut towers bars up top...
stabilizers out back on GS only...
There's a company that makes billet S-Bars for GS only!..
No Sig
Re: rs rear suspension question
It says for gs only but it will also work on an rs because you can take the lower tie bar and put it on an rs ou just need the longer bolts. Im pretty sure of this , not positive.
92' Rs-t b6t/De - RIP
93' Rs-t BPT - Sold
03' WRB wrx Wagon - Current
93' Rs-t BPT - Sold
03' WRB wrx Wagon - Current
Re: rs rear suspension question
so u guys dont have a rear stabilizer bar?
<small>[ December 07, 2003, 04:07 PM: Message edited by: Steeb ]</small>
<small>[ December 07, 2003, 04:07 PM: Message edited by: Steeb ]</small>
- jaydog5678
- Regular Member
- Posts: 1043
- Joined: March 27th, 2002, 2:01 am
- Location: Marietta, GA,
- Contact:
Re: rs rear suspension question
You can use the SRD lower tie bar without using longer bolts. They're the same bolts as the GS, just without the factory tie bar.Originally posted by nos92mx3:
It says for gs only but it will also work on an rs because you can take the lower tie bar and put it on an rs ou just need the longer bolts. Im pretty sure of this , not positive.
Yes, every Mx-3 has a rear stabilizer bar.Originally posted by Steeb:
so u guys dont have a rear stabilizer bar?
Re: rs rear suspension question
is it the same size as a gs stabilizer bar? what size is it?
im glad one person can still tell a stabilizer bar from a tie/strut bar.
im glad one person can still tell a stabilizer bar from a tie/strut bar.
- jaydog5678
- Regular Member
- Posts: 1043
- Joined: March 27th, 2002, 2:01 am
- Location: Marietta, GA,
- Contact:
Re: rs rear suspension question
It's either going to be a 21mm or 19mm swaybar. I'm betting it's 21, but I'll double check some friend's GS's.