t3/t4 turbo and injector question

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
Post Reply
User avatar
Dali
Supporting Member
Posts: 1621
Joined: January 28th, 2003, 2:01 am
antispam: No
Location: Williams lake, BC

t3/t4 turbo and injector question

Post by Dali »

first off im tired and been reading way too much info. is anyone running a t3/t4 turbo set up, getting mixed thoughts on this turbo for a klze motor, got a 14b and am planning on selling it and can either get a t3 or the t3/t4 but dont know which is better. other question is what size injectors are you running for a turbo set up on the klze. other thing is a fuel pressure regulator, anyone running one, thanks, im going to keep reading for a bit.
1993 White gs klze.
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: t3/t4 turbo and injector question

Post by babyblueMX3 »

a t3 is too smal for our 2.5 the only t3 you could use but still will be small is a t3 super 60..I suggest going with the t3/t04e or b

as far as the injector goes it depends what kind of boost you are running..It still suggest getting millenia kj injectors..they are 280cc versus our stock taht are 220cc..but still the 220 will get you up to around 5-6psi..after that swap them..I heard the 220 are good for around 280hp so don't quote me on those numbers
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
Dali
Supporting Member
Posts: 1621
Joined: January 28th, 2003, 2:01 am
antispam: No
Location: Williams lake, BC

Re: t3/t4 turbo and injector question

Post by Dali »

i know a guy who is good with turbos, he told me the t3/t4 would be no good because it would take too long to spool.
1993 White gs klze.
User avatar
bmwm3guy
Regular Member
Posts: 1066
Joined: March 7th, 2004, 2:01 am
Location: Gatineau, QC
Contact:

Re: t3/t4 turbo and injector question

Post by bmwm3guy »

well that depends on what you want. As the Spool time decreases, potential boost decreases as well. If you want massive HP.. you gotta put up with some turbo lag, the less turbo lag = less power.
User avatar
goldsberry1
Regular Member
Posts: 260
Joined: November 30th, 2002, 2:01 am
Location: greenville, nc usa
Contact:

Re: t3/t4 turbo and injector question

Post by goldsberry1 »

unless you get one of those turbos i have seen with a t4 turbine side, the spool up time wont be bad. if you want low rpm spooling get a .48 ar turbine t3 and a .60 compressor side. that should spool right around 2500rpm.
92' mx-3 gsr, built engine, forged internals, p/p ze heads. t3/t4e .63/.60 turbo, udp, msd ignition, millenia s injectors, millenia im, water cooled intercooler, afpr, fmu. running at 7 psi right now
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: t3/t4 turbo and injector question

Post by babyblueMX3 »

Originally posted by Dali:
i know a guy who is good with turbos, he told me the t3/t4 would be no good because it would take too long to spool.
mm that shows he doesn't know much..a t3/t4 with a .68 a/r turbine would start spooling at around 3000 :shrug: who's running under 3000rpm anyways
we're talking about the 2.5 not the 1.8L
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
rebel2k4
Regular Member
Posts: 542
Joined: February 29th, 2004, 2:01 am
Location: Loveland, CO

Re: t3/t4 turbo and injector question

Post by rebel2k4 »

I am running a .63 t3/.60 T04B S trim. It is a perfect match for the KL motor.

Even when my KL was n/a I wouldnt expect to go fast unless I was at 4.5k+ RPMs.

But as a matter of fact the driveability is awesome with it. Low end power is much better and highway mileage has gone to 31-32 MPG. Part throttle the car also has more power.

You dont want a small turbo on a K series motor. Its just not a good match.

Oh yeah, and lag is next to nothing. If I wanna punch it from a roll, I just hold RPM's at 4k and the turbo spools instantly when I punch it.
94 Mazda MX3 GS - 395 whp 397 ft lbs untuned on pump gas and stock KLDE 15 psi boost. now running 16 psi and E85.. numbers=? 425ish whp
04 GSXR 600- full exh, power commander 3, int turn signals, etc
98 Ford Ranger 3.0L
01 YZ250- most fun vehicle Ive ever owned.
95 Eclipse- built 420a, 60-1, megasquirt, 371 whp @ 17 psi, dsm-broken-car-curse
Post Reply

Return to “Forced Induction”