What´s the best way to disable EGR?
What´s the best way to disable EGR?
I think that disabling the EGR would be great on a Turbocharged engine, as when it´s open, the exhaust backpressure spinning the turbine decreases for sure! I heard about bolting a plate on the exhaust manifold (Kl-ze style) and leaving all the system untouched, but I don´t know if it would cause any CEL. Any other suggestion?
European Mx3 GsRT
- mazdasly75
- Regular Member
- Posts: 32
- Joined: October 19th, 2001, 2:01 am
- Location: Trois-Rivières, QC, Canada
Re: What´s the best way to disable EGR?
You may 3 things:
-put a dime in between the gas recirculation conduct. This will block the gas passage and the EGR still fonctional. No cell.<p>-Install ZE ecu. No need to hook the EGR anymore.<p>-or like me buy a stand alone fuel management.<p>The first above is the cheapest way to do the mod.<p>But, you know the EGR is shutting off at 75% TB opening?![Shrug :shrug:](./images/smilies/shrug.gif)
-put a dime in between the gas recirculation conduct. This will block the gas passage and the EGR still fonctional. No cell.<p>-Install ZE ecu. No need to hook the EGR anymore.<p>-or like me buy a stand alone fuel management.<p>The first above is the cheapest way to do the mod.<p>But, you know the EGR is shutting off at 75% TB opening?
![Shrug :shrug:](./images/smilies/shrug.gif)
1996 MX3, KL, stock internal, T3T4, 10psi, tial wastegate and blow off, 450cc injectors, 255lph, 3" mandrel bend exaust, 67mmTB, megasquirt II, launch control/flat shift, boost controler, 4bars MAP 16x16 built in, 300whp
![Image](http://i158.photobucket.com/albums/t94/mazdasly75/My_mx3/KL_turbo_2-2.jpg)
![Image](http://i158.photobucket.com/albums/t94/mazdasly75/My_mx3/KL_turbo_2-2.jpg)
Re: What´s the best way to disable EGR?
yes, but with in my turbo I had to put the turbo quite far, what results on a laggy turbo boost response! I think that it may help a bit!
European Mx3 GsRT
-
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Re: What´s the best way to disable EGR?
When an mx-3 is at wide open throttle, doesn't the EGR automatically shut off?
- Buff1110
- Supporting Member
- Posts: 588
- Joined: February 26th, 2001, 2:01 am
- Location: Howell, NJ, USA
Re: What´s the best way to disable EGR?
egr is off at wot
Dan
92 Mx-3 Gs, KLZE Powered!! - SOLD!!!!
02 Tacoma TRD - Daily
93 Honda del Sol - New Project
92 Mx-3 Gs, KLZE Powered!! - SOLD!!!!
02 Tacoma TRD - Daily
93 Honda del Sol - New Project
Re: What´s the best way to disable EGR?
What TPS voltage does the ECU interperet as WOT?
-
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Re: What´s the best way to disable EGR?
I beleive 4.5
Re: What´s the best way to disable EGR?
Sorry if this sounds ignorant, maybe I've heard the non-abreviated term...What is EGR and TPS?
No Sig
-
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Re: What´s the best way to disable EGR?
TPS = Throttle Position Sensor
EGR = Exhaust Gas Recirculation
EGR = Exhaust Gas Recirculation
Re: What´s the best way to disable EGR?
what does the klze do with the exhaust gases since it doesnt use an EGR??
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: What´s the best way to disable EGR?
Seriously... Your exhaust pipe ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: What´s the best way to disable EGR?
d00d! this has plauged man kind for centuries :p
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy