Automatic to manual swap? Any different from the FAQ?
-
greenstorm
- Regular Member
- Posts: 210
- Joined: May 12th, 2004, 2:01 am
- Location: Grantsburg, WI
Automatic to manual swap? Any different from the FAQ?
The FAQ says its for an MX-6 or PGT....is there any difference for the 3?
what kind of car IS that?
-
PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
Re: Automatic to manual swap? Any different from the FAQ?
Not really there may be some minor differences, but should be basically the same. We (MOCA) are doing one for the President ,Atlanta MX-3, Labor Day weekend, so if you have any more questions just ask on our forum. Or after labor day we should know exaclty, but I don't anticipate any problems at all.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
pelado
- Regular Member
- Posts: 1179
- Joined: August 27th, 2001, 2:01 am
- Location: Russellville, AR, USA
Re: Automatic to manual swap? Any different from the FAQ?
You'll need to use MX-3 manual trans axles as (I believe) all others are the wrong length.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel