Good bye forever.
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Good bye forever.
well I got my ZE Distributor and coil assembly working.
I had to do it all on my own, since the people that have done it befor decided to NOT SHARE the information.
I will be posting a proper write up on how to do this swap, Then I will NEVER POST HERE AGAIN.
<small>[ June 22, 2004, 01:27 PM: Message edited by: Custommx3 ]</small>
I had to do it all on my own, since the people that have done it befor decided to NOT SHARE the information.
I will be posting a proper write up on how to do this swap, Then I will NEVER POST HERE AGAIN.
<small>[ June 22, 2004, 01:27 PM: Message edited by: Custommx3 ]</small>
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
-
- Regular Member
- Posts: 486
- Joined: July 16th, 2002, 2:01 am
- Location: canada
Re: Good bye forever.
sweet i might need that rightup.
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: Good bye forever.
dont go man, i would have shared my info if i had done this work before
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Re: Good bye forever.
aww kurt is that why your leaving?
Black 94 RS, Erebuni MS style front, OEM sideskirts, Clear signals, altezza tails, 93 seats, Civic projectors
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: Good bye forever.
damn....thats unexpected.
I treid to figure out a way to bypass the crappy ignition module inside our disty using a HEI (general motors) module that you mount externally of the disty & also how to rig an external MSD blaster coil, but I couldn't get my car to start after I hooked it all up, so I went back to the stock disty.
BTW: the info for the KLZE disty swap is on Probetalk...all over probetalk. Should be ez to find with a search.
I treid to figure out a way to bypass the crappy ignition module inside our disty using a HEI (general motors) module that you mount externally of the disty & also how to rig an external MSD blaster coil, but I couldn't get my car to start after I hooked it all up, so I went back to the stock disty.
BTW: the info for the KLZE disty swap is on Probetalk...all over probetalk. Should be ez to find with a search.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
Re: Good bye forever.
Well Kurt, I always like your posts as they have such a sting in them - I'll miss them - I would prefer if you kept going though on the board
-
- Regular Member
- Posts: 45
- Joined: August 24th, 2003, 2:01 am
- Location: san diego
Re: Good bye forever.
I honestly have to say this is a shame. Your posts have been some of the most helpful for a nobbie like me in getting through my ZE swap. as well as a learning more about the MX3 in general. I really do hate to see you leave the community. But i can also see why your a bit pissed at those not willing to share info as willing as you are. I know you will most definately be missed from this forum.
-Silver_Wraith
-Silver_Wraith
Wha-hoooo!!!! its finally in pics to come soon. http://www.cardomain.com/memberpage/540890
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
Re: Good bye forever.
I could've sworn people did help you out when they told you just to use your stock disty, but whatever. Its a shame since you did help many people.
1993 Mazda RX-7 Touring Edition Innocent Blue Mica- Not stock...
1993 Teal MX-3 GS- KLZE and other goodies. RIP
1993 Teal MX-3 GS- KLZE and other goodies. RIP
Re: Good bye forever.
blah blah blah
<small>[ June 22, 2004, 04:23 PM: Message edited by: J Love ]</small>
<small>[ June 22, 2004, 04:23 PM: Message edited by: J Love ]</small>
93 White MX-3 "Ebay special"
94 Green 626 V6 5-speed "family car"
94 Mazda B2300 SE "project turbo truk"
94 Green 626 V6 5-speed "family car"
94 Mazda B2300 SE "project turbo truk"
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Re: Good bye forever.
And how many BMW techs do yo know? If I were you I would retract your previous statement.Originally posted by J Love:
typical of all BMW techs; share something that is already commonly known in the automotive world and act like it's patented by the krauts...
Anyhow, like the Motley Crew says:
"Don't go away mad, just go away"
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
Re: Good bye forever.
J Love, I do think that was a little uncalled for, even if it was a joke.
Curt don't GOOOOOOOOOOOOO!
Curt don't GOOOOOOOOOOOOO!
93 GS, KLZE, KL31 ECU, Centerforce Stg 3 Clutch, 2.25" Exhaust w/Flowmaster muffler, OBX Headers, Pheno Spacers, Front & rear X-drilled/slotted Rotors, KVR pads, SS brake & clutch lines, Ractive Filter, H&R Springs, Tokico Blue Struts, 8mm Accel Wires, MSD 6A w/ Blaster 2 Coil, HVAC Indiglo Panel. *Sold*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: Good bye forever.
I'm confused. Who didn't help? I looked up the thread, and one guy gave a wiring diagram, and I couldn't figure out what more you needed aside from that since you didn't specifically ask. Anyways, I thought pretty much everyone who's swapped just threw the DE distributor on?
-
- Regular Member
- Posts: 764
- Joined: June 16th, 2002, 2:01 am
Re: Good bye forever.
Surely you can see how offensive both your generalization and choice of language is...? C'mon man, I've read your other stuff & you definitely seemed better than that post indicates... right?Originally posted by J Love:
typical of all BMW techs; share something that is already commonly known in the automotive world and act like it's patented by the krauts...
Anyhow, like the Motley Crew says:
"Don't go away mad, just go away"
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: Good bye forever.
I researched, and noone had the answer. I tried to get it for ya, but had no luck.
- Casino
- Regular Member
- Posts: 779
- Joined: April 20th, 2002, 2:01 am
- Location: Sudbury Ontario Canada / windsor
Re: Good bye forever.
that sucks that your leaving man.
this is what ive been talking about though people being ****s and not sharing information
this is what ive been talking about though people being ****s and not sharing information