mx6 - mx3 clutch
mx6 - mx3 clutch
does the 2.5 mx6 clutch fit in the 1.8 mx3?
ie: street-import.com
sells clutchs for the 1.8 for 440 dollars
and the mx6 for 380 dollars.
so can i just tak the mx6 clutch and dump it in?
im guessing i can and save myself a bit of money.... also an engine swap will be done in the future so wondering if that will work
ie: street-import.com
sells clutchs for the 1.8 for 440 dollars
and the mx6 for 380 dollars.
so can i just tak the mx6 clutch and dump it in?
im guessing i can and save myself a bit of money.... also an engine swap will be done in the future so wondering if that will work
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: mx6 - mx3 clutch
YEs it should, basically the same tranny(besides 5th gear)and same block. We just have a smaller flywheel.
Re: mx6 - mx3 clutch
Thanks:)
just saved me 60 dollars:)
just saved me 60 dollars:)
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
- monstar-mx-3
- Regular Member
- Posts: 1112
- Joined: February 28th, 2002, 2:01 am
- Location: vancouver
Re: mx6 - mx3 clutch
Yep. I'm running a 2.5 tranny on my 1.8 with 2.5 Act Clutch. Works great
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: mx6 - mx3 clutch
mx3 GS clutch = MX6 LS clutch = Probe GT clutch = Protege LX clutch = Capri XR2 clutch = Mazda Miata 1.8 clutch = Escort GT clutch = Mercury Tracer LTS clutch = Mazdaspeed protege clutch = 626 ES V6 clutch..................list goes on
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
Re: mx6 - mx3 clutch
i just ordered a centreforce dual friction
for a mx6 to fit into my mx3 1.8
cost 375 CAD inc tax.
sweet
for a mx6 to fit into my mx3 1.8
cost 375 CAD inc tax.
sweet
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: mx6 - mx3 clutch
They arnt all the same, just I know the 2.5L is slightly bigger than the 1.8L , but still works.
-
- Regular Member
- Posts: 452
- Joined: May 15th, 2003, 2:01 am
- Location: CLEMSON, SC
- Contact:
Re: mx6 - mx3 clutch
Harlem~~
I was told that if I order a clutch from CM, to order the MX-6 clutch and NOT the MX-3. I was told it is suppose to be 10mm bigger..thus, 10mm more grip. Would you concur?
~CHANKO
<small>[ April 06, 2004, 03:38 PM: Message edited by: CHANKO ]</small>
I was told that if I order a clutch from CM, to order the MX-6 clutch and NOT the MX-3. I was told it is suppose to be 10mm bigger..thus, 10mm more grip. Would you concur?
~CHANKO
<small>[ April 06, 2004, 03:38 PM: Message edited by: CHANKO ]</small>
MX-3 Owners Club of Atlanta
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
Re: mx6 - mx3 clutch
chanko - you're right I fitted the mx-6 one when I did my KLZE & side by side the mx6 is 10mm bigger
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: mx6 - mx3 clutch
stock G-series transmission clutch size is 225mm A few of the lower powered cars have 215mm versions, but it doens't matter. All of the clutches are interchangeable between flywheels so 225 or 215 is up to you.
I'm using a MX3 ACT and it was 225mm when I pulled it out of the box, so who knows.
I'm using a MX3 ACT and it was 225mm when I pulled it out of the box, so who knows.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
-
- Regular Member
- Posts: 452
- Joined: May 15th, 2003, 2:01 am
- Location: CLEMSON, SC
- Contact:
Re: mx6 - mx3 clutch
Si & Harlem~~
Thanks! I believe I'll go with the wider as well.
Thanks! I believe I'll go with the wider as well.
MX-3 Owners Club of Atlanta
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06