CAR WON'T START~!!!!!!!!!!!
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
CAR WON'T START~!!!!!!!!!!!
ok i finally installed my engine and all, i used the mx-6 wirirng harness and then an mx-3 fuse box(which i think might be my problem) well after i decided to finally start my car after 3months(which is a protege)as i cranked it thats all it did everything cranks but the car will not start, do you think it might be the wirirng to the fuse box or maybe because i haven't installed the o2sensors yet,*(but i was told it would still turn on)can anyone please help i'm lost now
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
Re: CAR WON'T START~!!!!!!!!!!!
also while i'm cranking it up it makes a gulping type noise
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
Re: CAR WON'T START~!!!!!!!!!!!
someone please help~!!!!!!!!
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: CAR WON'T START~!!!!!!!!!!!
why did you change the wiring harness?
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- johnnyb
- Supporting Member
- Posts: 1079
- Joined: January 26th, 2003, 2:01 am
- Location: Brampton, On, Canada
Re: CAR WON'T START~!!!!!!!!!!!
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Nd4SpdSe:
why did you change the wiring harness?<hr></blockquote><p>swapped a BP for a KF-ZE.
why did you change the wiring harness?<hr></blockquote><p>swapped a BP for a KF-ZE.
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
Re: CAR WON'T START~!!!!!!!!!!!
because i swapped to v6
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: CAR WON'T START~!!!!!!!!!!!
might wanna check your firing order....onlything i can think of right now
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
Re: CAR WON'T START~!!!!!!!!!!!
what about the gulping noise i mentioned it makes
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: CAR WON'T START~!!!!!!!!!!!
im at a loss for that
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: CAR WON'T START~!!!!!!!!!!!
check to see if you are getting spark. pull out the spark plug wire and put it close to the chassis to ground it (check for spark while turning car over), do what ever you have to do so its not pumping the gas while doing this though.<p>If its getting a spark then maybe your fuel lines are switched/plugged.<p>Maybe you havent attached a ground wire, usually attaches to the passenger side valve cover.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
Re: CAR WON'T START~!!!!!!!!!!!
may i ask which wire is it that is grounded
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: CAR WON'T START~!!!!!!!!!!!
The ground wire on my gs is attached to the intake manifold right by the firewall, just above the back valve cover on the passanger side. Some people say that if this isnt connected your car wont run.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
Re: CAR WON'T START~!!!!!!!!!!!
well i did the whole ground wire connection and it still won't start, so next is the fuel lines how can i check and see if they are plugged up
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
-
- Regular Member
- Posts: 210
- Joined: August 1st, 2003, 2:01 am
- Location: Miami
Re: CAR WON'T START~!!!!!!!!!!!
someone please help me out, i need to get my car up and running again
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: CAR WON'T START~!!!!!!!!!!!
go to the online shop manual on this site. Go to section F2-105. What I was trying to say is maybe you have your fuel lines switched. <p>here is the pic
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21