CAR WON'T START~!!!!!!!!!!!

V6 Technical/Performance Discussions
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

ok i finally installed my engine and all, i used the mx-6 wirirng harness and then an mx-3 fuse box(which i think might be my problem) well after i decided to finally start my car after 3months(which is a protege)as i cranked it thats all it did everything cranks but the car will not start, do you think it might be the wirirng to the fuse box or maybe because i haven't installed the o2sensors yet,*(but i was told it would still turn on)can anyone please help i'm lost now
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

Re: CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

also while i'm cranking it up it makes a gulping type noise
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

Re: CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

someone please help~!!!!!!!!
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
User avatar
Nd4SpdSe
Senior Member
Posts: 11212
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: CAR WON'T START~!!!!!!!!!!!

Post by Nd4SpdSe »

why did you change the wiring harness?
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
User avatar
johnnyb
Supporting Member
Posts: 1079
Joined: January 26th, 2003, 2:01 am
Location: Brampton, On, Canada

Re: CAR WON'T START~!!!!!!!!!!!

Post by johnnyb »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Nd4SpdSe:
why did you change the wiring harness?<hr></blockquote><p>swapped a BP for a KF-ZE.
Image
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

Re: CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

because i swapped to v6
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: CAR WON'T START~!!!!!!!!!!!

Post by papa roached »

might wanna check your firing order....onlything i can think of right now
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

Re: CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

what about the gulping noise i mentioned it makes
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: CAR WON'T START~!!!!!!!!!!!

Post by papa roached »

im at a loss for that
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
timpronk
Regular Member
Posts: 603
Joined: August 2nd, 2001, 2:01 am
Location: Brantford, Ontario, Canada
Contact:

Re: CAR WON'T START~!!!!!!!!!!!

Post by timpronk »

check to see if you are getting spark. pull out the spark plug wire and put it close to the chassis to ground it (check for spark while turning car over), do what ever you have to do so its not pumping the gas while doing this though.<p>If its getting a spark then maybe your fuel lines are switched/plugged.<p>Maybe you havent attached a ground wire, usually attaches to the passenger side valve cover.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

Re: CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

may i ask which wire is it that is grounded
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
timpronk
Regular Member
Posts: 603
Joined: August 2nd, 2001, 2:01 am
Location: Brantford, Ontario, Canada
Contact:

Re: CAR WON'T START~!!!!!!!!!!!

Post by timpronk »

The ground wire on my gs is attached to the intake manifold right by the firewall, just above the back valve cover on the passanger side. Some people say that if this isnt connected your car wont run.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

Re: CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

well i did the whole ground wire connection and it still won't start, so next is the fuel lines how can i check and see if they are plugged up
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
UrBaNsTyLe55
Regular Member
Posts: 210
Joined: August 1st, 2003, 2:01 am
Location: Miami

Re: CAR WON'T START~!!!!!!!!!!!

Post by UrBaNsTyLe55 »

someone please help me out, i need to get my car up and running again
92 323 KF-ZE V6 swap done by me 2 1/4 header back exhaust no cat car now for sale for very cheap! email me at queensnysfinnest@aol.com for pics and questions
timpronk
Regular Member
Posts: 603
Joined: August 2nd, 2001, 2:01 am
Location: Brantford, Ontario, Canada
Contact:

Re: CAR WON'T START~!!!!!!!!!!!

Post by timpronk »

go to the online shop manual on this site. Go to section F2-105. What I was trying to say is maybe you have your fuel lines switched. <p>here is the picImage
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
Post Reply

Return to “V6 Technical/Performance”