Rough Idle > Vaccuum Leak?
Rough Idle > Vaccuum Leak?
I changed all my vaccuum hoses and now it idles rough, and the check engine light comes on. It sits at 1000rpm and the jumps to 2000rmp after roughly 15 seconds. It also smells like there is a lot of unburned fuel in the exhaust. Most of the hoses fit snug, and the ones that were a bit loose I tightened with some metal ties. Anyone have any suggestions as to which hoses I should look at first? In hindsight I probably should have started the engine after I installed each hose.
Re: Rough Idle > Vaccuum Leak?
When I put the engine in diagnostic mode the code that comes up is 18, but that one isn't listed in the FAQ. Anyone know what the code 18 refers to?
-
- Regular Member
- Posts: 1179
- Joined: August 27th, 2001, 2:01 am
- Location: Russellville, AR, USA
Re: Rough Idle > Vaccuum Leak?
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Jutzi420:
When I put the engine in diagnostic mode the code that comes up is 18, but that one isn't listed in the FAQ. Anyone know what the code 18 refers to?<hr></blockquote><p>You could determine this on your own by going to www.mx-3.com and using the online shop manual.
When I put the engine in diagnostic mode the code that comes up is 18, but that one isn't listed in the FAQ. Anyone know what the code 18 refers to?<hr></blockquote><p>You could determine this on your own by going to www.mx-3.com and using the online shop manual.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
Re: Rough Idle > Vaccuum Leak?
Actually, I haven't found code 18 listed at any of the shop manuals or sites I've visited. Well, I'm going to be talking to my Mazda dealer this morning, hopefully they can help me out.
Re: Rough Idle > Vaccuum Leak?
Ok, the code was a 10 and an 8. I didn't time the pauses right. I didn't plug the wiring harness back in the air flow sensor. whoops.