KLZE swap is done!!!<P>It fired up after only a few cranks! It idles OK, too!!<P>Only a couple of minor problems, one is a vacuum leak around the TB. I reused a gasket (I know, I know I shouldn't but I just didn't want to make that extra trip to the parts store) and now I've got to redo it.<P>Other minor problem is a too long throttle cable with the Millenia intake. I didn't use the MX-3's TB spacer but I'm going to put that on with some new gaskets. That should cure my vacuum leak and may move the TB enough to take up the throttle cable slack. <P>For those that might be curious, I used a 97 Millenia intake, KLZE ECU, and the 1.8 VAF. I bypassed the IAC and used phenolic spacers. The hood shuts but just barely, definitely no room for a strut bar. The only other mods are a UR crank pulley, PRM intake, and a Pacesetter catback.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
Thanks guys! It runs pretty strong. There's only one drag strip close by and it's only an 1/8 mile one at that but I'll give 'er a run here shortly.<P>The ECU is a KL31.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by David Coleman:<BR><STRONG>Congrats man! I'll be soon behind you once Sean gets back from Japan...<P>So how's she run? </STRONG><HR></BLOCKQUOTE><P>When will he be back???<P>Thanks
I recently bought a millenia IM, Ive heard about the hood closing issues.. does that foam have to be ripped off from underneath the hood to be able to close it without touching the IM?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by SmokyMcGee:<BR><STRONG>I recently bought a millenia IM, Ive heard about the hood closing issues.. does that foam have to be ripped off from underneath the hood to be able to close it without touching the IM?</STRONG><HR></BLOCKQUOTE><P>The underhood insulation does touch the intake and the hood just barely closes (phenolic spacers), but I wouldn't rip it off just because of that.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JJ:<BR><STRONG>Where did you get ur KLZE at? Just curious?</STRONG><HR></BLOCKQUOTE><P>An eBay auction. <BR> <BR>But it worked out well for me.<P>This place didn't normally deal in JDM engines just happened to have one.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now. http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by curtklze:<BR><STRONG>what did you do when you "by-pased the IAC"?</STRONG><HR></BLOCKQUOTE><P>No coolant flow through the IAC, that's all. A modest attempt at keeping sources of heat away from intake air.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ZUNE MX-3 Gs:<BR><STRONG>BUY KL-ZE´S FROM vIZUAL!!!! I´M GETTING JEALOUS!!! </STRONG><HR></BLOCKQUOTE><P>What? What do you mean by this?