engines

[AlphaBitz]

Your best bet is one of the import engine suppliers in Toronto.<BR><P>------------------<BR>Jesse Turner<BR>aka AlphaBitz<BR>MX-3 Dreamer<BR>Kanata, Ontario, Canada

[jonnybpimpin]

well the KL ZE is really really hard to find. b/c its a J spec engine. so it would have to be imported. U may find one at a junk yard with low km or something. but it will be hard. its probly better to look for the KL 03. which is about 165 hp and u can find them in any Mazda 626 & MX-6 - 1993-97 <BR>Ford Probe GT - 1993-97 . Go to a junk yard or something and u can pick one up for probly ummm around $1000 can.. i live in canada ontario.. close to toronto. im just learning all about mx3's too. so i dont know much . <BR>but maybe these junk yard websights may help u .. :<BR> <A HREF="http://www.u-r-g.com/" TARGET=_blank>http://www.u-r-g.com/</A> <A HREF="http://car-part.com/" TARGET=_blank>http://car-part.com/</A> <P><BR>jonny

[jojo2k23]

is it possible for me to find just the block of a kl-ze and then rebuild the engine from scratch,like installin new piston,rings,etc...and also findin the intake and exhaust manifold and etc.....HOW HARD IS IT TO FIND THESE PARTS?

[Custom mx-3]

Hey <BR>Did anyone here of a place called Japan motor works in toronto.

[jonnybpimpin]

Japan motor in toronto . <BR>i really dont know.

[Ogimoj]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jojo2k23:<BR><B>is it possible for me to find just the block of a kl-ze and then rebuild the engine from scratch,like installin new piston,rings,etc...and also findin the intake and exhaust manifold and etc.....HOW HARD IS IT TO FIND THESE PARTS?</B><HR></BLOCKQUOTE><P>If you just want the block, it would be easier and more economical to get the block from a kl-03, since it is the same block and a lot more common in N. America. Problem is that finding the rest of the parts you wants is $$$ and more $$$, so best to get the KL-ZE if you want the most bang for the buck<P><p>[This message has been edited by Ogimoj (edited July 20, 2001).]

[Kim 95' V6 DK]

try look at cork sport they have KL-ZE for sale (if there site is updated)

[Custom mx-3]

Corksport shows they sell KL_ZE engines for $2049 and thats US, are they all that expensive, or can you find them for a cheaper price then that. But they say it has 200HP, they also say its $395 to program the ECU, do you have to do that when you purchase one of these engines.

[jojo2k23]

The KLZE will put 160-175 hp to the ground on a dyno, due to ~15% drivetrain loss through the transmission/differential in FWD cars. It is rated at ~197hp in japan when you convert 200ps to hp